Spare Parts & Accessories

SIMATEC

Singapore

*Lubricant must be provided by buyer. Since Simalube lubricators are precision engineering products. We do advise you to do gas generator exchange and refill lubricant with our well-trained technician. This is to make sure your lubricator always in the best condition to protect your assets.

Singapore Mainland

*Lubricant must be provided by buyer.

Since Simalube lubricators are precision engineering products. We do advise you to do gas generator exchange and refill lubricant with our well-trained technician. This is to make sure your lubricator always in the best condition to protect your assets.

15ml Auto-Lubricator Gas Generator Exchange & Refill service (Excluding Lubricant)

Simalube SIMATEC Maintenance & Repair Services 15ml Auto-Lubricator Gas Generator Exchange & Refill service (Excluding Lubricant) Maintenance & Repair Services Spare Parts & Accessories

Simalube SIMATEC Maintenance & Repair Services

Simalube SIMATEC Maintenance & Repair Services 30ml Auto-Lubricator Gas Generator Exchange & Refill Service (Excluding Lubricant) Maintenance & Repair Services Spare Parts & Accessories

30ml Auto-Lubricator Gas Generator Exchange & Refill Service (Excluding Lubricant)

Simalube SIMATEC Maintenance & Repair Services 60ml Auto-Lubricator Gas Generator Exchange and Refill Service (Excluding Lubricant) Maintenance & Repair Services Spare Parts & Accessories

60ml Auto-Lubricator Gas Generator Exchange and Refill Service (Excluding Lubricant)

*Lubricant must be provided by the buyer. Since Simalube lubricators are precision engineering products. We do advise you to do gas generator exchange and refill lubricant with our well-trained technician. This is to make sure your lubricator is always in the best condition to protect your assets.

*Lubricant must be provided by the buyer. Since Simalube lubricators are precision 
engineering products. We do advise you to do gas generator exchange and refill lubricant with our well-trained technician. This is to make sure your lubricator is always in the best condition to protect your assets.


125ml Auto-Lubricator Gas Generator Exchange and Refill Service (Excluding Lubricant)

Simalube SIMATEC Maintenance & Repair Services 125ml Auto-Lubricator Gas Generator Exchange and Refill Service (Excluding Lubricant) Maintenance & Repair Services Spare Parts & Accessories

*Empty with self-filling with Grease *Refill Service excluded.

* Lead time: 3 to 4 weeks upon order confirmation

 

Enhance the performance and durability of your rotating machinery components with the Simalube 15ml Automatic Lubricator.

 * Ensures continuous and precise lubrication, reducing downtime and maintenance costs.
 * Unlimited range of uses in any location, confined and hard-to-reach spaces
 * Freely selectable dispensing cycle of 1 to 12 months
 * IP68 certified and EX certified for all zones
 * environmental sustainability, easy disposal at the end of the dispensing cycle
 * Can be refilled up to 3 times
 * No more manual lubrication that resulted in under-lubrication or over-lubrication with less machine downtime and an increase in machine performance
 * Easy installation and cost-saving solution suitable for a wide range of industries and broad variety of applications
 * The lubricant dispensers are available with a wide standard range of greases and oils and can be used both under water and in potentially explosive areas (ATEX)
 * Example of applications are pump, motor engine, rolling bearings, chains, conveyor belts, gears, lifting systems, linear/sliding guides, threaded spindles, ventilation system for HVAC (Heating, Ventilation, and Air-Conditioning)

Refill Service : https://antbuildz.com/buy/equipment/674811f6cc1d6007ca9eafca

* Lead time: 3 to 4 weeks upon order confirmation&nbsp;Enhance the performance and durability of your rotating machinery components with the Simalube 15ml Automatic Lubricator.<ul><li>Ensures continuous and precise lubrication, reducing downtime and maintenance costs.</li><li>Unlimited range of uses in any location, confined and hard-to-reach spaces</li><li>Freely selectable dispensing cycle of 1 to 12 months</li><li>IP68 certified and EX certified for all zones</li><li>environmental sustainability, easy disposal at the end of the dispensing cycle</li><li>Can be refilled up to 3 times</li><li>No more manual lubrication that resulted in under-lubrication or over-lubrication with less machine downtime and an increase in machine performance</li><li>Easy installation and cost-saving solution suitable for a wide range of industries and broad variety of applications</li><li>The lubricant dispensers are available with a wide standard range of greases and oils and can be used both under water and in potentially explosive areas (ATEX)</li><li>Example of applications are pump, motor engine, rolling bearings, chains, conveyor belts, gears, lifting systems, linear/sliding guides, threaded spindles, ventilation system for HVAC (Heating, Ventilation, and Air-Conditioning)</li></ul>

Simalube 15ml empty for self-filling with grease 

Simalube  SIMATEC Other Parts & Accessories 15ml Single-Point Automatic lubricator Other Parts & Accessories Spare Parts & Accessories

Simalube  SIMATEC Other Parts & Accessories

15ml Single-Point Automatic lubricator

*Empty with self-filling with Grease *Lead time 3-4 weeks upon order confirmation *Refill Service excluded. Enhance the performance and durability of your rotating machinery components with the Simalube 30ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs. Simalube 30ML Automatic Lubricator: - Unlimited range of uses in any location, confined and hard-to-reach spaces - Freely selectable dispensing cycle of 1 to 12 months - IP68 certified and EX certified for all zones - Environmental sustainability, easy disposal at the end of the dispensing cycle - Simalube can be refilled up to 3 times - No more manual lubrication that resulted in under-lubrication or over- lubrication with less machine downtime and an increase in machine performance - Easy installation and cost-saving solution suitable for a wide range of industries. The simalube automatic lubrication system is used in a wide variety of applications. The lubricant dispensers are available with a wide standard range of greases and oils and can be used both under water and in potentially explosive areas (ATEX). Applications of simalube single-point lubricators: -pump -motor engine -rolling bearings -chains -conveyor belts -gears -lifting systems -linear/sliding guides -threaded spindles -ventilation system (HVAC Heating, ventilation, and air-conditioning) Refill Service: https://antbuildz.com/buy/equipment/674812fbcc1d6007ca9eb8dc

*Lead time 3-4 weeks upon order confirmation

Enhance the performance and durability of your rotating machinery components with the Simalube 30ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs.


Simalube 30ML Automatic Lubricator:

- Unlimited range of uses in any location, confined and hard-to-reach 
   spaces
- Freely selectable dispensing cycle of 1 to 12 months
- IP68 certified and EX certified for all zones
- Environmental sustainability, easy disposal at the end of the dispensing 
   cycle
- Simalube can be refilled up to 3 times
- No more manual lubrication that resulted in under-lubrication or over- 
   lubrication with less machine downtime and an increase in machine 
   performance
- Easy installation and cost-saving solution suitable for a wide range of 
   industries. The simalube automatic lubrication system is used in a wide 
   variety of applications. The lubricant dispensers are available with a wide 
   standard range of greases and oils and can be used both under water 
   and in potentially explosive areas (ATEX).

Applications of simalube single-point lubricators:

-pump
-motor engine
-rolling bearings
-chains
-conveyor belts
-gears
-lifting systems
-linear/sliding guides
-threaded spindles
-ventilation system (HVAC Heating, ventilation, and air-conditioning)


Simalube 30ml Empty for Self-Filling with Grease

Simalube  SIMATEC Other Parts & Accessories 30ml Single Point Automatic Lubricator Other Parts & Accessories Spare Parts & Accessories

30ml Single Point Automatic Lubricator

*Empty with self-filling with Oil *Refill service excluded.

* Lead time: 3 to 4 weeks upon order confirmation

 

Enhance the performance and durability of your rotating machinery components with the Simalube 15ml Automatic Lubricator.

 * Ensures continuous and precise lubrication, reducing downtime and maintenance costs.
 * Unlimited range of uses in any location, confined and hard-to-reach spaces
 * Freely selectable dispensing cycle of 1 to 12 months
 * IP68 certified and EX certified for all zones
 * environmental sustainability, easy disposal at the end of the dispensing cycle
 * Can be refilled up to 3 times
 * No more manual lubrication that resulted in under-lubrication or over-lubrication with less machine downtime and an increase in machine performance
 * Easy installation and cost-saving solution suitable for a wide range of industries and broad variety of applications
 * The lubricant dispensers are available with a wide standard range of greases and oils and can be used both under water and in potentially explosive areas (ATEX)
 * Example of applications are pump, motor engine, rolling bearings, chains, conveyor belts, gears, lifting systems, linear/sliding guides, threaded spindles, ventilation system for HVAC (Heating, Ventilation, and Air-Conditioning)

Refill Service : https://antbuildz.com/buy/equipment/674811f6cc1d6007ca9eafca

Simalube 15ml Empty with Self-Filling with Oil

2024 Simalube  SIMATEC Other Parts & Accessories 15ml Single Point Automatic Lubricator Other Parts & Accessories Spare Parts & Accessories

15ml Single Point Automatic Lubricator

*Empty with self-filling with Oil *Lead time 3-4 weeks upon order confirmation *Refill Service excluded. Enhance the performance and durability of your rotating machinery components with the Simalube 30ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs. Simalube 30ML Automatic Lubricator: - Unlimited range of uses in any location, confined and hard-to-reach spaces - Freely selectable dispensing cycle of 1 to 12 months - IP68 certified and EX certified for all zones - Environmental sustainability, easy disposal at the end of the dispensing cycle - Simalube can be refilled up to 3 times - No more manual lubrication that resulted in under-lubrication or over- lubrication with less machine downtime and an increase in machine performance - Easy installation and cost-saving solution suitable for a wide range of industries. The simalube automatic lubrication system is used in a wide variety of applications. The lubricant dispensers are available with a wide standard range of greases and oils and can be used both under water and in potentially explosive areas (ATEX). Applications of Simalube single-point lubricators: -pump -motor engine -rolling bearings -chains -conveyor belts -gears -lifting systems -linear/sliding guides -threaded spindles -ventilation system (HVAC Heating, ventilation, and air-conditioning) Refill Service: https://antbuildz.com/buy/equipment/674812fbcc1d6007ca9eb8dc

*Lead time 3-4 weeks upon order confirmation

Enhance the performance and durability of your rotating machinery components with the Simalube 30ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs.

Simalube 30ML Automatic Lubricator:

- Unlimited range of uses in any location, confined and hard-to-reach 
   spaces
- Freely selectable dispensing cycle of 1 to 12 months
- IP68 certified and EX certified for all zones
- Environmental sustainability, easy disposal at the end of the dispensing 
   cycle
- Simalube can be refilled up to 3 times
- No more manual lubrication that resulted in under-lubrication or over- 
   lubrication with less machine downtime and an increase in machine 
   performance
- Easy installation and cost-saving solution suitable for a wide range of 
   industries. The simalube automatic lubrication system is used in a wide 
   variety of applications. The lubricant dispensers are available with a wide 
   standard range of greases and oils and can be used both under water 
   and in potentially explosive areas (ATEX).

Applications of Simalube single-point lubricators:

-pump
-motor engine
-rolling bearings
-chains
-conveyor belts
-gears
-lifting systems
-linear/sliding guides
-threaded spindles
-ventilation system (HVAC Heating, ventilation, and air-conditioning)


Simalube 30ml Empty for Self-Filling with Oil

*Empty with self-filling with Grease *Lead time 3-4 weeks upon order confirmation *Refilling service excluded. Enhance the performance and durability of your rotating machinery components with the Simalube 60ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs. Simalube 60ML Automatic Lubricator: - Unlimited range of uses in any location, confined and hard-to-reach spaces - Freely selectable dispensing cycle of 1 to 12 months - IP68 certified and EX certified for all zones - Environmental sustainability, easy disposal at the end of the dispensing cycle - Simalube can be refilled up to 3 times - No more manual lubrication that resulted in under-lubrication or over-lubrication with less machine downtime and an increase in machine performance - Easy installation and cost-saving solution suitable for a wide range of industries. The simalube automatic lubrication system is used in a wide variety of applications. The lubricant dispensers are available with a wide standard range of greases and oils and can be used both under water and in potentially explosive areas (ATEX). Applications of simalube single-point lubricators: -pump -motor engine -rolling bearings -chains -conveyor belts -gears -lifting systems -linear/sliding guides -threaded spindles -ventilation system (HVAC Heating, ventilation, and air-conditioning) Refill Service: https://antbuildz.com/buy/equipment/674813d8cc1d6007ca9ec0ea

*Lead time 3-4 weeks upon order confirmation
*Refilling service excluded.(With refilling service 
  please visit XXXXXXXXXX) 

Enhance the performance and durability of your rotating machinery components with the Simalube 60ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs.


Simalube 15ML Automatic Lubricator:

- Unlimited range of uses in any location, confined 
   and hard-to-reach spaces
- Freely selectable dispensing cycle of 1 to 12 
   months
- IP68 certified and EX certified for all zones
- Environmental sustainability, easy disposal at the 
   end of the dispensing cycle
- Simalube can be refilled up to 3 times
- No more manual lubrication that resulted in 
   under-lubrication or over-lubrication with less 
   machine downtime and an increase in machine 
   performance
- Easy installation and cost-saving solution 
   suitable for a wide range of industries. The 
   simalube automatic lubrication system is used in 
   a wide variety of applications. The lubricant 
   dispensers are available with a wide standard 
   range of greases and oils and can be used both 
   under water and in potentially explosive areas 
   (ATEX).

Applications of simalube single-point lubricators:

-pump
-motor engine
-rolling bearings
-chains
-conveyor belts
-gears
-lifting systems
-linear/sliding guides
-threaded spindles
-ventilation system (HVAC Heating, ventilation, and 
  air-conditioning)



Simalube 60ml Empty for Self-Filling with Grease

Simalube SIMATEC Other Parts & Accessories 60ml Single Point Automatic Lubrication (For grease use) Other Parts & Accessories Spare Parts & Accessories

Simalube SIMATEC Other Parts & Accessories

60ml Single Point Automatic Lubrication (For grease use)

Simatool Bearing Handling Tool BHT 300-500 (max. lifting force 500 kg) The safe solution for handling medium, large and very large bearings The Bearing Handling Tool is ideally suited for professionally and securely lifting large, heavy bearings. The BHT reduces the risk of accidents and bearing damage. The BHT encloses the outer race of the bearing with a steel band. With two handles on opposite sides and two carrying belts, the bearing can be easily transported with a lifting crane. The bore remains open so the bearings can be easily placed onto a shaft. With the Bearing Handling Tool, bearings can be both horizontally and vertically fitted onto a shaft. Two anti-twist devices, which are fastened against the inner race, ensure that the inner race of the bearing does not turn out of control. · Bearing bore remains free for mounting on shaft · Mounting on shaft in horizontal and vertical position possible · Avoidance of accident risk · Can be used in combination with Simatherm induction heaters · TÜV SÜD certified · Scope of delivery(2 carrying belts, 2 high-quality handles, 1 pair of protective gloves, 2 turning handles for safe handling, 2 steel clamping strips, 2 inner race fasteners)

Titan SmartTech Pte. Ltd.

Simatool  SIMATEC Other Parts & Accessories Bearing Handling Tool BHT 300-500(max. lifting force 500 kg) Other Parts & Accessories Spare Parts & Accessories

Simatool  SIMATEC Other Parts & Accessories

Bearing Handling Tool BHT 300-500(max. lifting force 500 kg)

*Empty with self-filling with Oil *Lead time 3-4 weeks upon order confirmation *Refilling service excluded. Enhance the performance and durability of your rotating machinery components with the Simalube 125ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs. Simalube 125ML Automatic Lubricator: - Unlimited range of uses in any location, confined and hard-to-reach spaces - Freely selectable dispensing cycle of 1 to 12 months - IP68 certified and EX certified for all zones - Environmental sustainability, easy disposal at the end of the dispensing cycle - Simalube can be refilled up to 3 times - No more manual lubrication that resulted in under-lubrication or over-lubrication with less machine downtime and an increase in machine performance - Easy installation and cost-saving solution suitable for a wide range of industries. The simalube automatic lubrication system is used in a wide variety of applications. The lubricant dispensers are available with a wide standard range of greases and oils and can be used both under water and in potentially explosive areas (ATEX). Applications of simalube single-point lubricators: -pump -motor engine -rolling bearings -chains -conveyor belts -gears -lifting systems -linear/sliding guides -threaded spindles -ventilation system (HVAC Heating, ventilation, and air-conditioning) Refill Service: https://antbuildz.com/buy/equipment/6748147ecc1d6007ca9ec443

*Lead time 3-4 weeks upon order confirmation
*Refilling service excluded. (With refilling service 
  please visit XXXXXXXXXX) 

Enhance the performance and durability of your rotating machinery components with the Simalube 125ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs.


Simalube 125ML Automatic Lubricator:

- Unlimited range of uses in any location, confined 
   and hard-to-reach spaces
- Freely selectable dispensing cycle of 1 to 12 
   months
- IP68 certified and EX certified for all zones
- Environmental sustainability, easy disposal at the 
   end of the dispensing cycle
- Simalube can be refilled up to 3 times
- No more manual lubrication that resulted in 
   under-lubrication or over-lubrication with less 
   machine downtime and an increase in machine 
   performance
- Easy installation and cost-saving solution 
   suitable for a wide range of industries. The 
   simalube automatic lubrication system is used in 
   a wide variety of applications. The lubricant 
   dispensers are available with a wide standard 
   range of greases and oils and can be used both 
   under water and in potentially explosive areas 
   (ATEX).

Applications of simalube single-point lubricators:

-pump
-motor engine
-rolling bearings
-chains
-conveyor belts
-gears
-lifting systems
-linear/sliding guides
-threaded spindles
-ventilation system (HVAC Heating, ventilation, and 
  air-conditioning)


Simalube 125ml Empty for Self-Filling with Oil

Simalube  SIMATEC Other Parts & Accessories 125ml Single Point Automatic Lubricator Other Parts & Accessories Spare Parts & Accessories

125ml Single Point Automatic Lubricator

*Empty with self-filling with grease *Lead time 3-4 weeks upon order confirmation *Refilling service excluded. Enhance the performance and durability of your rotating machinery components with the Simalube 250ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs. Simalube 250ML Automatic Lubricator: - Unlimited range of uses in any location, confined and hard-to-reach spaces - Freely selectable dispensing cycle of 1 to 12 months - IP68 certified and EX certified for all zones - Environmental sustainability, easy disposal at the end of the dispensing cycle - Simalube can be refilled up to 3 times - No more manual lubrication that resulted in under-lubrication or over-lubrication with less machine downtime and an increase in machine performance - Easy installation and cost-saving solution suitable for a wide range of industries. The simalube automatic lubrication system is used in a wide variety of applications. The lubricant dispensers are available with a wide standard range of greases and oils and can be used both under water and in potentially explosive areas (ATEX). Applications of simalube single-point lubricators: -pump -motor engine -rolling bearings -chains -conveyor belts -gears -lifting systems -linear/sliding guides -threaded spindles -ventilation system (HVAC Heating, ventilation, and air-conditioning) Refill Service: https://antbuildz.com/buy/equipment/67481523cc1d6007ca9ec852

*Lead time 3-4 weeks upon order confirmation
*Refilling service excluded. (With refilling service 
  please visit XXXXXXXXXX) 

Enhance the performance and durability of your rotating machinery components with the Simalube 250ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs.


Simalube 250ML Automatic Lubricator:

- Unlimited range of uses in any location, confined 
   and hard-to-reach spaces
- Freely selectable dispensing cycle of 1 to 12 
   months
- IP68 certified and EX certified for all zones
- Environmental sustainability, easy disposal at the 
   end of the dispensing cycle
- Simalube can be refilled up to 3 times
- No more manual lubrication that resulted in 
   under-lubrication or over-lubrication with less 
   machine downtime and an increase in machine 
   performance
- Easy installation and cost-saving solution 
   suitable for a wide range of industries. The 
   simalube automatic lubrication system is used in 
   a wide variety of applications. The lubricant 
   dispensers are available with a wide standard 
   range of greases and oils and can be used both 
   under water and in potentially explosive areas 
   (ATEX).

Applications of simalube single-point lubricators:

-pump
-motor engine
-rolling bearings
-chains
-conveyor belts
-gears
-lifting systems
-linear/sliding guides
-threaded spindles
-ventilation system (HVAC Heating, ventilation, and 
  air-conditioning)


Simalube 250ml Empty for Self-Filling with Grease

Simalube  SIMATEC Other Parts & Accessories 250ml Single Point Automatic Lubricator Other Parts & Accessories Spare Parts & Accessories

250ml Single Point Automatic Lubricator

*Price might differ based on the installation location. IP66 Waterproof Rating: Ensures robust protection against dust and water, making the camera suitable for various weather conditions. Tempered Optical Glass with AR Coating: Provides up to 98% light transmittance, enhancing image clarity and reducing glare Thermal Insulation Coating: Covers the entire body to effectively reflect sunlight and prevent overheating, ensuring optimal performance in bright conditions. Super-Hydrophobic Tempered Glass: Significantly reduces the impact of rain on shooting by repelling water and maintaining clear visibility. Industrial-Grade Product Design: Engineered to perform reliably in extreme environments ranging from -20°C to 70°C, ensuring durability and consistent operation. Dual Operating Systems: Equipped with both Linux and FreeRTOS, enhancing system stability and reducing power consumption for more efficient performance. 1.3-Inch OLED Display: Allows for quick and easy monitoring of device status without the need to log in to the cloud, streamlining user interactions. Data Interaction: Facilitates seamless data transfer and management through 4G network connectivity and cloud integration, enabling real-time High-Capacity Lithium Batteries and Solar Cells: Provides extended power supply and energy efficiency, ensuring reliable operation even in remote locations. Photo Data Upload Options: Supports uploading to Dropbox and Google Drive, as well as FTP, offering versatile data management and storage solutions.

2024 FixCamera Pro Cameras Time Lapse Camera with protection case Cameras Photography & Video IT Electronics Technology

FixCamera Pro Cameras

Time Lapse Camera with protection case

*For Hoarding CCTV Direct Power -High quality imaging with 4 MP resolution -Clear imaging against strong backlight due to 120 dB WDR technology -Efficient H.265+ compression technology -Focus on human and vehicle classification based on deep learning -Provide real-time security via built-in two-way audio -Active strobe light and audio alarm to warn intruders off -Support on-board storage up to 512 GB (SD card slot) -Water and dust resistant (IP67) *The above is only for the whole unit and the electronics *Things not included are the NVR, HDD required for storage and installation which is subjected to to actual site conditions *For estimation to handle the above 2 points, per camera it can be assumed to have an additional $300 of cost (which has been factored into the calculation) *All hardware warranty is for 1 year

*For Hoarding CCTV Direct Power

-High quality imaging with 4 MP resolution
-Clear imaging against strong backlight due to 120 dB WDR technology
-Efficient H.265+ compression technology
-Focus on human and vehicle classification based on deep learning
-Provide real-time security via built-in two-way audio
-Active strobe light and audio alarm to warn intruders off
-Support on-board storage up to 512 GB (SD card slot)
-Water and dust resistant (IP67)

Hoarding CCTV with direct power (4MP Fixed Network Camera)

2024 HIK VISION 4MP IP CAMERA Cameras Hoarding CCTV with direct power (4MP Fixed Network Camera) Cameras Photography & Video IT Electronics Technology

HIK VISION 4MP IP CAMERA Cameras

*Please state your use cases in detail. *Use cases can refer catalogue Deliverable: Software 1) 1 Year License 2) Allow selection of up to 3 Use Cases Each 3) Web Dashboard 4) Alert Image + Preview Video 5) Telegram Alerts 6) 1 Year storage of Alert Information 7) Configuration and Networking 8) Unlimited Account User Creation 9) Unlimited Report Generation Hardware 1) 8x Fixed Bullet Cameras 2) 1x 8 Channel Network Video Recorder (NVR) with 6TB HDD to support up to 8 cameras 3) AI Hardware (Supports up to 8 cameras) Professional Services 1) Delivery, Installation, Setup 2) Maintenance, Support 3) Testing and commissioning of cameras 4) Remote viewing configuration Training 1) 2 Hour Training For Any Number Of Users

2024 Ailyssa AI Technological Solutions Ai Video Surveillance Systems (8 New Camera 3 Use Case) -AiSafety AI Technological Solutions Technology

Ailyssa AI Technological Solutions

Ai Video Surveillance Systems (8 New Camera 3 Use Case) -AiSafety

*Empty with self-filling with Oil *Lead time 3-4 weeks upon order confirmation *Refilling service excluded. Enhance the performance and durability of your rotating machinery components with the Simalube 250ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs. Simalube 250ML Automatic Lubricator: - Unlimited range of uses in any location, confined and hard-to-reach spaces - Freely selectable dispensing cycle of 1 to 12 months - IP68 certified and EX certified for all zones - Environmental sustainability, easy disposal at the end of the dispensing cycle - Simalube can be refilled up to 3 times - No more manual lubrication that resulted in under-lubrication or over-lubrication with less machine downtime and an increase in machine performance - Easy installation and cost-saving solution suitable for a wide range of industries. The Simalube automatic lubrication system is used in a wide variety of applications. The lubricant dispensers are available with a wide standard range of greases and oils and can be used both under water and in potentially explosive areas (ATEX). Applications of Simalube single-point lubricators: -pump -motor engine -rolling bearings -chains -conveyor belts -gears -lifting systems -linear/sliding guides -threaded spindles -ventilation system (HVAC Heating, ventilation, and air-conditioning) Refill Service: https://antbuildz.com/buy/equipment/67481523cc1d6007ca9ec852

*Lead time 3-4 weeks upon order confirmation
*Refilling service excluded. (With refilling service 
  please visit XXXXXXXXXX) 

Enhance the performance and durability of your rotating machinery components with the Simalube 250ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs.


Simalube 250ML Automatic Lubricator:

- Unlimited range of uses in any location, confined 
   and hard-to-reach spaces
- Freely selectable dispensing cycle of 1 to 12 
   months
- IP68 certified and EX certified for all zones
- Environmental sustainability, easy disposal at the 
   end of the dispensing cycle
- Simalube can be refilled up to 3 times
- No more manual lubrication that resulted in 
   under-lubrication or over-lubrication with less 
   machine downtime and an increase in machine 
   performance
- Easy installation and cost-saving solution 
   suitable for a wide range of industries. The 
   Simalube automatic lubrication system is used in 
   a wide variety of applications. The lubricant 
   dispensers are available with a wide standard 
   range of greases and oils and can be used both 
   under water and in potentially explosive areas 
   (ATEX).

Applications of Simalube single-point lubricators:

-pump
-motor engine
-rolling bearings
-chains
-conveyor belts
-gears
-lifting systems
-linear/sliding guides
-threaded spindles
-ventilation system (HVAC Heating, ventilation, and 
  air-conditioning)


Simalube 250ml Empty for Self-Filling with Oil

*Please state your use cases in detail *Use case can refer catalogue Deliverable: Software 1) 1 Year License 2) Allow selection of up to 3 Use Cases Each 3) Web Dashboard 4) Alert Image + Preview Video 5) Telegram Alerts 6) 1 Year storage of Alert Information 7) Configuration and Networking 8) Unlimited Account User Creation 9) Unlimited Report Generation Hardware 1) 4x Fixed Bullet Cameras 2) 1x 8 Channel Network Video Recorder (NVR) with 6TB HDD to support up to 8 cameras 3) AI Hardware PC (Supports up to 8 cameras) Professional Services 1) Delivery, Installation, Setup 2) Maintenance, Support 3) Testing and commissioning of cameras 4) Remote viewing configuration Training 1) 2 Hour Training For Any Number Of Users

*Please state your use cases 

Deliverable:

Software
1) 1 Year License
2) Allow selection of up to 3 Use Cases Each
3) Web Dashboard
4) Alert Image + Preview Video
5) Telegram Alerts
6) 1 Year storage of Alert Information
7) Configuration and Networking
8) Unlimited Account User Creation
9) Unlimited Report Generation

Hardware
1) 4x Fixed Bullet Cameras
2) 1x 8 Channel Network Video Recorder (NVR) with
     6TB HDD to support up to 8 cameras
3) AI Hardware PC (Supports up to 8 cameras)

Professional Services
1) Delivery, Installation, Setup
2) Maintenance, Support
3) Testing and commissioning of cameras
4) Remote viewing configuration

Training
1) 2 Hour Training For Any Number Of Users

Ai Video Surveillance Systems (4 New Camera 3 use Cases)

2024 Ailyssa AI Technological Solutions Ai Video Surveillance Systems (4 New Camera 3 use Cases)-AiSafety AI Technological Solutions Technology

Ai Video Surveillance Systems (4 New Camera 3 use Cases)-AiSafety

*Please state your use cases in detail. *Use cases can refer catalogue. Deliverable: Software 1) 1 Year License 2) Allow selection of up to 2 Use Cases Each 3) Cloud/Remote Based AI 4) Web Dashboard 5) Alert Image + Preview Video 6) Telegram Alerts 7) 1 Year storage of Alert Information 8) Configuration and Networking 9) Unlimited Account User Creation 10) Unlimited Report Generation Hardware 1) AI-enabled Video Surveillance System (VSS) unit with 2 IP cameras (1 Fixed Bullet and 1 Pan-TiltZoom) Professional Services 1) Delivery, Installation, Setup 2) Maintenance, Support 3) Testing and commissioning of cameras 4) Remote viewing configuration Training 1) 2 Hour Training For Any Number Of Users

*Please state your use cases in detail.

Deliverable:

Software
1) 1 Year License
2) Allow selection of up to 2 Use Cases Each
3) Cloud/Remote Based AI
4) Web Dashboard
5) Alert Image + Preview Video
6) Telegram Alerts
7) 1 Year storage of Alert Information
8) Configuration and Networking
9) Unlimited Account User Creation
10) Unlimited Report Generation

Hardware
1) AI-enabled Video Surveillance System (VSS) unit
with 2 IP cameras (1 Fixed Bullet and 1 Pan-TiltZoom)

Professional Services
1) Delivery, Installation, Setup
2) Maintenance, Support
3) Testing and commissioning of cameras
4) Remote viewing configuration

Training
1) 2 Hour Training For Any Number Of Users

Ai Video Surveillance Systems (2 Camera 2 Use Cases)

2024 Ailyssa AI Technological Solutions Ai Video Surveillance Systems (2 Camera 2 Use Cases)-AiSafety AI Technological Solutions Technology

Ai Video Surveillance Systems (2 Camera 2 Use Cases)-AiSafety

*Lead time 3-4 weeks upon order confirmation. The ideal solution for removing deep groove ball bearings from the shaft and housing The BP 160 Bearing Puller enables the professional removal of deep groove ball bearings. Sealed bearings can also be removed after the corresponding seal has been removed. The ball adapters of the pull rod are inserted in the bearing race and then rotated by 90 degrees to ensure a secure hold. The BP 160 Bearing Puller makes it possible to remove more than 50 different deep groove ball bearings, with an inner diameter of 30 to 160 mm. · With the help of extensions, even hard-to-reach bearings can be easily expanded. A bearing selection table is enclosed in the tool case. · The removal tool BP 160 is suitable for the removal of deep groove ball bearings, from the shaft and from the housing. · Professional removal of deep groove ball bearings · Adjacent parts do not need to be removed or dismantled · An ideal addition to the Simatool B P 61 Bearing Puller · For deep groove ball bearings with an inner diameter of 30 to 160 mm · All components are available as spare parts · Quick and safe selection through labelling of the bearing adapters · Pulling off ball bearings without removing the shaft · Mechanical pressure spindle designed for high removal forces · Scope of delivery (Pulling arm support beam G 1/2, Spindle G1/2, 2 pull rods, 2 extensions, Ball adapter A7 – A12)

Simatool SIMATEC Other Parts & Accessories Bearing Puller BP 160 Other Parts & Accessories Spare Parts & Accessories

Simatool SIMATEC Other Parts & Accessories

Bearing Puller BP 160

*Empty with self-filling with Grease *Lead time 3-4 weeks upon order confirmation *Refilling service excluded. Enhance the performance and durability of your rotating machinery components with the Simalube 125ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs. Simalube 125ML Automatic Lubricator: - Unlimited range of uses in any location, confined and hard-to-reach spaces - Freely selectable dispensing cycle of 1 to 12 months - IP68 certified and EX certified for all zones - Environmental sustainability, easy disposal at the end of the dispensing cycle - Simalube can be refilled up to 3 times - No more manual lubrication that resulted in under-lubrication or over-lubrication with less machine downtime and an increase in machine performance - Easy installation and cost-saving solution suitable for a wide range of industries. The simalube automatic lubrication system is used in a wide variety of applications. The lubricant dispensers are available with a wide standard range of greases and oils and can be used both under water and in potentially explosive areas (ATEX). Applications of simalube single-point lubricators: -pump -motor engine -rolling bearings -chains -conveyor belts -gears -lifting systems -linear/sliding guides -threaded spindles -ventilation system (HVAC Heating, ventilation, and air-conditioning) Refill Service: https://antbuildz.com/buy/equipment/6748147ecc1d6007ca9ec443

Simalube 125ml Empty for Self-Filling with Grease

*Lead time 3-4 weeks upon order confirmation. Professional dismounting of deep groove ball bearings and radial shaft seals The Simatool Twin Puller TP 150 can be used to expertly dismount deep groove ball bearings and radial shaft seals. Bearings with a tight fit on the inner or outer ring can be quickly and reliably dismounted with the help of this tool. The TP 150 can also be used to dismount shaft seals, thus making it a unique and professional dismounting tool. · Three dismounting functions in one tool set: dismounting deep groove ball bearings with shaft, dismounting deep groove ball bearings without shaft, dismounting of radial shaft seals · Perfect complement to the well-proven simatool Fitting Tool FT 33 · All components are available as spare parts · Suitable for shaft diameters from 10 to 100 mm and external diameters up to 150 mm · Compact toolset includes a selection table in a handy case · Case weight of 6.6 kg suitable for mobile use · Scope of delivery(6 sets of extraction arms (A1–A6), 2 threaded spindles (SW 19), 9 support washers (Ø 10–75 mm), Sliding hammer, Extension for sliding hammer, 50 tapping screws, 10 spacer rings)

Simatool SIMATEC Other Parts & Accessories Twin Puller TP 150 Other Parts & Accessories Spare Parts & Accessories

Twin Puller TP 150

*Please state the type of power voltage used (230V/110V). *Lead time 3-4 weeks upon order confirmation. Electric heating plate with temperature control The electric heating plates with thermostat-controlled heating are especially suitable for small bearings and machine parts. The temperature can be continuously adjusted between 50 °C and 200 °C on the controller. · HPS for workpieces weighing up to 5 kg · Designed to heat multiple workpieces simultaneously · Flat heating surface for gentle and uniform heating of the bearing · Also suitable for heating non-ferritic workpieces such as aluminum or brass · Available for voltages of 100–115 and 230V · Control range from 50 to 200 °C · 3 years manufacturer warranty · The cover prevents contamination of the workpieces during heating. In addition, the workpieces are heated quicker when the cover is closed. · Scope of delivery(1x HPS, 1x Protective gloves, 1x User manual, 1x Power cord)

Simatherm  SIMATEC Other Parts & Accessories Hot Plate Small HPS (230V/110V) Other Parts & Accessories Spare Parts & Accessories

Simatherm  SIMATEC Other Parts & Accessories

Hot Plate Small HPS (230V/110V)

*Please state your use cases in detail. *Please provide your existing camera spec. *Use case can refer catalogue Deliverable: Software 1) 1 Year License 2) Allow selection of up to 3 Use Cases Each 3) Web Dashboard 4) Alert Image + Preview Video 5) Telegram Alerts 6) 1 Year storage of Alert Information 7) Configuration and Networking 8) Unlimited Account User Creation 9) Unlimited Report Generation Hardware 1) AI Hardware PC (Supports up to 10 existing cameras) Note: Customer must install 10 of their own IP cameras as this is not part of the package Professional Services 1) Delivery, Installation, Setup 2) One Time Hardware Relocation 3) Maintenance, Support Training 1) 2 Hour Training For Any Number Of Users

*Please state your use cases in detail.
*Please provide your existing camera spec.
*Use case can refer catalogue

Deliverable:

Software
1)  1 Year License
2) Allow selection of up to 3 Use Cases Each
3) Web Dashboard
4) Alert Image + Preview Video
5) Telegram Alerts
6) 1 Year storage of Alert Information
7) Configuration and Networking
8) Unlimited Account User Creation
9) Unlimited Report Generation

Hardware
1) AI Hardware PC (Supports up to 10 existing
cameras)
Note: Customer must install 10 of their own IP
cameras as this is not part of the package

Professional Services
1) Delivery, Installation, Setup
2) One Time Hardware Relocation
3) Maintenance, Support

Training
1) 2 Hour Training For Any Number Of Users

Ai Video Surveillance Systems (Leverage 10 Existing Camera 3 use Cases)

2024 Ailyssa AI Technological Solutions Ai Video Surveillance Systems (Leverage 10 Existing Camera 3 use Cases)-AiSafety  AI Technological Solutions Technology

Ai Video Surveillance Systems (Leverage 10 Existing Camera 3 use Cases)-AiSafety 

*For mobile CCTV with solar power. -High quality imaging with 4 MP resolution -Clear imaging against strong backlight due to 120 dB WDR technology -Efficient H.265+ compression technology -Focus on human and vehicle classification based on deep learning -Provide real-time security via built-in two-way audio -Active strobe light and audio alarm to warn intruders off -Support on-board storage up to 512 GB (SD card slot) -Water and dust resistant (IP67) *The above is only for the whole unit and the electronics *Things not included are the NVR, HDD required for storage and installation which is subjected to to actual site conditions *For estimation to handle the above 2 points, per camera it can be assumed to have an additional $300 of cost (which has been factored into the calculation) *All hardware warranty is for 1 year

*For mobile CCTV with solar power.

-High quality imaging with 4 MP resolution
-Clear imaging against strong backlight due to 120 dB WDR technology
-Efficient H.265+ compression technology
-Focus on human and vehicle classification based on deep learning
-Provide real-time security via built-in two-way audio
-Active strobe light and audio alarm to warn intruders off
-Support on-board storage up to 512 GB (SD card slot)
-Water and dust resistant (IP67)

Mobile CCTV with Solar Power (4MP Fixed Network Camera)

2024 HIK VISION 4MP IP CAMERA Cameras Mobile CCTV with Solar Power (4MP Fixed Network Camera) Cameras Photography & Video IT Electronics Technology

*Lead time 3-4 weeks upon order confirmation. The ideal solution for pressing in or on bearings or other ring-shaped components Thanks to the Fitting Tool FT-P - in combination with the mechanical press - a correct assembly of components with an inner diameter of more than 50 mm is guaranteed. The FT-P is the ideal solution for assemblies with greater installation forces, as the tool can be used on presses. It thus allows assemblies that would not be possible by hitting with a hammer. · Product designed for use with presses · Ideal supplement to the proven simatool Fitting Tool FT 33 · High-quality aluminum rings that do not deform even with press-in forces of 5 tons · All components available as spare parts · Compact case with high quality tool parts and glued in instruction manual · Also suitable for the installation of sleeves, sealing rings, pulleys, etc. · Aluminum rings are clearly marked for quick and easy selection · Scope of delivery (6 aluminum rings, 1 sleeve, 1 FT-P DC adapter ring (in combination with FT 33))

Simatool SIMATEC Other Parts & Accessories Fitting Tool FT-P Other Parts & Accessories Spare Parts & Accessories

Fitting Tool FT-P

Simatool Bearing Handling Tool BHT 500-700 (max. lifting force 700 kg) The safe solution for handling medium, large and very large bearings The Bearing Handling Tool is ideally suited for professionally and securely lifting large, heavy bearings. The BHT reduces the risk of accidents and bearing damage. The BHT encloses the outer race of the bearing with a steel band. With two handles on opposite sides and two carrying belts, the bearing can be easily transported with a lifting crane. The bore remains open so the bearings can be easily placed onto a shaft. With the Bearing Handling Tool, bearings can be both horizontally and vertically fitted onto a shaft. Two anti-twist devices, which are fastened against the inner race, ensure that the inner race of the bearing does not turn out of control. · Bearing bore remains free for mounting on shaft · Mounting on shaft in horizontal and vertical position possible · Avoidance of accident risk · Can be used in combination with Simatherm induction heaters · TÜV SÜD certified · Scope of delivery(2 carrying belts, 2 high-quality handles, 1 pair of protective gloves, 2 turning handles for safe handling, 2 steel clamping strips, 2 inner race fasteners)

Simatool  SIMATEC Other Parts & Accessories Bearing Handling Tool BHT 500-700 (max. lifting force 700 kg) Other Parts & Accessories Spare Parts & Accessories

Bearing Handling Tool BHT 500-700 (max. lifting force 700 kg)

*Please state your use cases in detail. *Please provide your existing camera spec. *Use cases can refer catalogue Deliverable: Software 1) 1 Year License 2) Allow selection of up to 3 Use Cases Each 3) Web Dashboard 4) Alert Image + Preview Video 5) Telegram Alerts 6) 1 Year storage of Alert Information 7) Configuration and Networking 8) Unlimited Account User Creation 9) Unlimited Report Generation Hardware 1) AI Hardware PC (Supports up to 4 existing cameras) Note: Customer must install 4 of their own IP cameras as this is not part of the package Professional Services 1) Delivery, Installation, Setup 2) One Time Hardware Relocation 3) Maintenance, Support Training 1) 2 Hour Training For Any Number Of Users

*Please state your use cases in detail.
*Please provide your existing camera spec.

Deliverable:

Software
1) 1 Year License
2) Allow selection of up to 3 Use Cases Each
3) Web Dashboard
4) Alert Image + Preview Video
5) Telegram Alerts
6) 1 Year storage of Alert Information
7) Configuration and Networking
8) Unlimited Account User Creation
9) Unlimited Report Generation

Hardware
1) AI Hardware PC (Supports up to 4 existing
cameras)
Note: Customer must install 4 of their own IP
cameras as this is not part of the package

Professional Services
1) Delivery, Installation, Setup
2) One Time Hardware Relocation
3) Maintenance, Support

Training
1) 2 Hour Training For Any Number Of Users

AI Video Surveillance Systems (Leverage 4 Existing Camera 3 Use Cases)

2024 Ailyssa AI Technological Solutions AI Video Surveillance Systems (Leverage 4 Existing Camera 3 Use Cases)-AiSafety AI Technological Solutions Technology

AI Video Surveillance Systems (Leverage 4 Existing Camera 3 Use Cases)-AiSafety

*For Tower Crane -High quality imaging with 4 MP resolution -Clear imaging against strong backlight due to 120 dB WDR technology -Efficient H.265+ compression technology -Focus on human and vehicle classification based on deep learning -Provide real-time security via built-in two-way audio -Active strobe light and audio alarm to warn intruders off -Support on-board storage up to 512 GB (SD card slot) -Water and dust resistant (IP67) *The above is only for the whole unit and the electronics *Things not included are the NVR, HDD required for storage and installation which is subjected to to actual site conditions *For estimation to handle the above 2 points, per camera it can be assumed to have an additional $300 of cost (which has been factored into the calculation) *All hardware warranty is for 1 year

*For Tower Crane 

-High quality imaging with 4 MP resolution
-Clear imaging against strong backlight due to 120 dB WDR technology
-Efficient H.265+ compression technology
-Focus on human and vehicle classification based on deep learning
-Provide real-time security via built-in two-way audio
-Active strobe light and audio alarm to warn intruders off
-Support on-board storage up to 512 GB (SD card slot)
-Water and dust resistant (IP67)

Tower Crane CCTV (4MP Fixed Network Camera) 

2024 HIK VISION 4MP IP CAMERA Cameras Tower Crane CCTV (4MP Fixed Network Camera)  Cameras Photography & Video IT Electronics Technology

MEWP - Parts & Accessories

Earth Moving - Parts & Accessories

Material Handling - Parts & Accessories

Compaction - Parts & Accessories

Safety - Parts & Accessories

Concrete - Parts & Accessories

Light Equipment & Tools - Spare Parts & Accessories

Other Parts & Accessories

Maintenance & Repair Services

Battery

*Empty with self-filling with Oil *Lead time 3-4 weeks upon order confirmation *Refilling service excluded. Enhance the performance and durability of your rotating machinery components with the Simalube 60ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs. Simalube 60ML Automatic Lubricator: - Unlimited range of uses in any location, confined and hard-to-reach spaces - Freely selectable dispensing cycle of 1 to 12 months - IP68 certified and EX certified for all zones - Environmental sustainability, easy disposal at the end of the dispensing cycle - Simalube can be refilled up to 3 times - No more manual lubrication that resulted in under-lubrication or over-lubrication with less machine downtime and an increase in machine performance - Easy installation and cost-saving solution suitable for a wide range of industries. The simalube automatic lubrication system is used in a wide variety of applications. The lubricant dispensers are available with a wide standard range of greases and oils and can be used both under water and in potentially explosive areas (ATEX). Applications of simalube single-point lubricators: -pump -motor engine -rolling bearings -chains -conveyor belts -gears -lifting systems -linear/sliding guides -threaded spindles -ventilation system (HVAC Heating, ventilation, and air-conditioning) Refill Service: https://antbuildz.com/buy/equipment/674813d8cc1d6007ca9ec0ea

*Lead time 3-4 weeks upon order confirmation
*Refilling service excluded.(For refilling service 
  please visit XXXXXXXXXX) 

Enhance the performance and durability of your rotating machinery components with the Simalube 60ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs.


Simalube 60ML Automatic Lubricator:

- Unlimited range of uses in any location, confined 
   and hard-to-reach spaces
- Freely selectable dispensing cycle of 1 to 12 
   months
- IP68 certified and EX certified for all zones
- Environmental sustainability, easy disposal at the 
   end of the dispensing cycle
- Simalube can be refilled up to 3 times
- No more manual lubrication that resulted in 
   under-lubrication or over-lubrication with less 
   machine downtime and an increase in machine 
   performance
- Easy installation and cost-saving solution 
   suitable for a wide range of industries. The 
   simalube automatic lubrication system is used in 
   a wide variety of applications. The lubricant 
   dispensers are available with a wide standard 
   range of greases and oils and can be used both 
   under water and in potentially explosive areas 
   (ATEX).

Applications of simalube single-point lubricators:

-pump
-motor engine
-rolling bearings
-chains
-conveyor belts
-gears
-lifting systems
-linear/sliding guides
-threaded spindles
-ventilation system (HVAC Heating, ventilation, and 
  air-conditioning)


Simalube 60ml Empty for Self-Filling With Oil

Simalube SIMATEC Other Parts & Accessories 60ml Single Point Automatic Lubricator (For Oil use) Other Parts & Accessories Spare Parts & Accessories

60ml Single Point Automatic Lubricator (For Oil use)

Simalube SIMATEC Maintenance & Repair Services 250ml Auto-Lubricator Gas Generator Exchange and Refill Service (Excluding Lubricant) Maintenance & Repair Services Spare Parts & Accessories

250ml Auto-Lubricator Gas Generator Exchange and Refill Service (Excluding Lubricant)

*Lead time 3-4 weeks upon order confirmation. The Seal Puller SP 50 helps with the professional removal of redial shaft seals The incorrect dismounting of radial shaft seals can damage shafts, housings, and ball bearings. The Seal Puller SP 50 helps to avoid extra costs by dismounting seals quickly and easily. Even seals that are recessed into a housing can be professionally removed. Practically any seal can be extracted with the help of the extensions. · Many different seal varieties can be removed in only 10 to 30 seconds · The removal can be completed without the hassle of dismounting neighboring parts · All components available as spare parts · The toolkit removes radial shaft seals without damaging the shaft or housing · Dismantling the gear housing is no longer necessary · In combination with the BP 61 it is available as a set in the simatool TP 150 · Scope of delivery (50 special screws for extracting radial shaft seals, 20 distance sleeves, 2 extensions, 1 steel sliding hammer)

Simatool SIMATEC Other Parts & Accessories Seal Puller SP 50 Other Parts & Accessories Spare Parts & Accessories

Seal Puller SP 50

*Lead time 3-4 weeks upon order confirmation. Fitting Tool FT 33 helps prevent premature bearing failure Improper mounting, in particular incorrectly applied mounting forces, are responsible for approx. 16% of all premature bearing failures. The simatool FT 33 rolling bearing fitting tool guarantees fast, precise and safe fitting of bearings with bore diameters from 10 to 50 mm. The correct combination of impact ring and impact sleeve ensures that the installation forces are never transmitted via the rolling elements of the bearing. · For bearing installation on the shaft, in the housing or on shaft and in housing at the same time · The inner and outer diameters of the impact rings are precisely matched to the dimensions of the rolling bearings · Extremely impact-resistant material for high durability of the impact rings and impact sleeves · The impact rings are pressed onto the impact sleeves, so that no independent loosening of the impact rings is possible · Also suitable for the installation of sockets, seals, pulleys, etc. · Suitable for 222 different rolling bearing sizes · Simatool Fitting Tool FT-P is the ideal supplement for working with presses and installation forces up to 5 tons · Fast, precise and safe installation of bearings and seals · Impact rings are clearly marked for quick and easy selection · All components from case are available as spare parts · Rolling bearings have significantly longer service life due to proper mounting · Thanks to the special DC adapter of the FT-P tool, the C-rings of the simatool FT 33 can also be used on presses · Scope of delivery (33 plastic nylon impact rings, 3 aluminum impact sleeves, 1 non-rebound hammer)

Simatool SIMATEC Other Parts & Accessories Fitting Tool FT33 Other Parts & Accessories Spare Parts & Accessories

Fitting Tool FT33

The tool for efficient dismounting of deep groove ball bearings With the extractor tool BP 61, deep groove ball bearings can be removed from the shaft. It is also equally suited for removing bearings from just a shaft. Even sealed bearings can be dismounted once the seal is removed. The hooks of the puller arms are placed in the outer ring. The toolset can be used with 70 different kinds of deep groove ball bearings with diameters of 10 to 100 mm. · The hooks of the puller arms latch directly into the outer raceway and support themselves on the shoulder of the inner ring, creating a secure hold and optimal power transfer · The hooks are spring-mounted onto the puller arms so that they can easily fit into the bearing · The high-quality steel puller arms are resilient and intended for long-lasting use · For shaft diameters measuring from 10–100 mm · All components are available as spare parts · An elastomer locking ring simplifies the attachment of the puller arms and holds them in position during the extraction process · The elastic locking ring simplifies tool set-up and holds the puller arms in position during extraction · The puller can also be used to remove sealed bearings from blind housings after the seal has been removed · Retaining flap simplifies attachment of the puller arms to the spindle and holds them in position · Scope of delivery(6 sets with 3 puller arms each, 2 spindles, 1 counter bracket)

Simatool SIMATEC Other Parts & Accessories Bearing Puller BP 61  Other Parts & Accessories Spare Parts & Accessories

Bearing Puller BP 61 

*Lead time 3-4 weeks upon order confirmation. The combination tool set for quick and easy mounting and dismounting of bearings The MK 10-30 enables fast and precise installation of bearings with bore diameters of 10-30 mm as well as the extraction of deep groove ball bearings from shafts and from housings of the same series. The tool set contains a multi-purpose installation tool suitable for the installation of bearings, sliding sleeves, sealing rings, tension rollers as well as similar products. For extracting deep groove ball bearings from housings and shafts, the kit includes a three-arm puller. The combination of this extractor with a slide hammer and support washers allows easy removal of deep groove ball bearings from housings. · The correct combination of impact ring and sleeves ensures that no mounting forces are transmitted via the rolling elements of the bearings, thus minimizing bearing damage due to incorrect mounting · The impact rings are made of high-strength modified plastic. The impact sleeves are made of anodized aluminum, this is extremely robust, stable and very light · A complete set of different sized extractor arms and spindles simplifies the dismounting of deep groove ball bearings · Bearing dismounting from blind housings and from shafts possible · All components are available as spare parts · The extractor arms were specially developed for precise engagement in the raceways of the bearings. This results in an optimum hold and allows higher dismounting forces. · The elastic retaining spring enables easy connection of the puller arms with the spindle · All components are clearly arranged in the carrying case for quick selection · Fast, precise mounting of bearings, seals, sliding sleeves and adapter sleeves · Scope of delivery (21 impact rings, 2 impact sleeves, 1 non-rebound hammer, 1 sliding hammer, 2 spindles, 5 sets of puller arms, 7 support rings, 1 counter bracket)

Simatool SIMATEC Other Parts & Accessories Bearing Maintenance MK 10-30 Other Parts & Accessories Spare Parts & Accessories

Bearing Maintenance MK 10-30

Simatool Bearing Handling Tool BHT 200-400 (max. lifting force 150 kg) The safe solution for handling medium, large and very large bearings The Bearing Handling Tool is ideally suited for professionally and securely lifting large, heavy bearings. The BHT reduces the risk of accidents and bearing damage. The BHT encloses the outer race of the bearing with a steel band. With two handles on opposite sides and two carrying belts, the bearing can be easily transported with a lifting crane. The bore remains open so the bearings can be easily placed onto a shaft. With the Bearing Handling Tool, bearings can be both horizontally and vertically fitted onto a shaft. Two anti-twist devices, which are fastened against the inner race, ensure that the inner race of the bearing does not turn out of control. · Bearing bore remains free for mounting on shaft · Mounting on shaft in horizontal and vertical position possible · Avoidance of accident risk · Can be used in combination with Simatherm induction heaters · TÜV SÜD certified · Scope of delivery(2 carrying belts, 2 high-quality handles, 1 pair of protective gloves, 2 turning handles for safe handling, 2 steel clamping strips, 2 inner race fasteners)

Simatool  SIMATEC Other Parts & Accessories Bearing Handling Tool 200-400 Other Parts & Accessories Spare Parts & Accessories

Bearing Handling Tool 200-400

*Please state the type of power voltage used (230V/110V). *Lead time 3-4 weeks upon order confirmation. Electric heating plate with temperature control The electric heating plates with thermostat-controlled heating are especially suitable for small bearings and machine parts. The temperature can be continuously adjusted between 50 °C and 200 °C on the controller. · HPL for workpieces weighing up to 10 kg · Designed to heat multiple workpieces simultaneously · Flat heating surface for gentle and uniform heating of the bearing · Also suitable for heating non-ferritic workpieces such as aluminum or brass · Available for voltages of 100–115 and 230V · Control range from 50 to 200 °C · 3 years manufacturer warranty · The cover prevents contamination of the workpieces during heating. In addition, the workpieces are heated quicker when the cover is closed. · Scope of delivery(1x HPL, 1x Protective gloves, 1x User manual, 1x Power cord)

Simatherm SIMATEC Other Parts & Accessories Hot Plate Large HPL (230V/110V) Other Parts & Accessories Spare Parts & Accessories

Simatherm SIMATEC Other Parts & Accessories

Hot Plate Large HPL (230V/110V)

*Please state the type of power voltage used (230V/110V). *Lead time 3-4 weeks upon order confirmation. The lightweight portable device with excellent performance. With a weight of only 3.5 kg, the simatherm IH 025 VOLCANO is the lightest portable induction heater in the world. The patented technology enables outstanding heating performance from an extremely light structure. You can use it to heat rolling bearings with an inner diameter as small as 20 mm up to on outer diameter of 160 mm and a weight of up to 10 kg. · Portable, compact and very light (3.5 kg) - comes in a practical carrying case · No support yoke required – simply place the workpiece on the device · A bearing weighing 5 kg can be heated to 110°C in under four minutes · Predictive Temperature Control (PTC) for automatic temperature monitoring · Automatic demagnetization · For workpieces with a minimum inner diameter of 20 mm up to a maximum outer diameter of 160 mm · For workpieces weighing up to 10 kg · Multi-stage power reduction for heating smaller parts · Silent in operation · 3 years manufacturer warranty · Scope of delivery (1x Simatherm IH 025 VOLCANO, 1x User manual, 1x Temperature probe, 1x Carrying bag, 1x Protective gloves, 1x Power cord)

*Please state the type of power voltage used (230V/110V).
*Lead time 3-4 weeks upon order confirmation.

The lightweight portable device with excellent performance.

With a weight of only 3.5 kg, the simatherm IH 025 VOLCANO is the lightest portable induction heater in the world. The patented technology enables outstanding heating performance from an extremely light structure. You can use it to heat rolling bearings with an inner diameter as small as 20 mm up to on outer diameter of 160 mm and a weight of up to 10 kg.

· Portable, compact and very light (3.5 kg) - comes in a practical carrying 
  case
· No support yoke required – simply place the workpiece on the device
· A bearing weighing 5 kg can be heated to 110°C in under four minutes
· Predictive Temperature Control (PTC) for automatic temperature 
  monitoring
· Automatic demagnetization
· For workpieces with a minimum inner diameter of 20 mm up to a maximum outer diameter of 160 mm
· For workpieces weighing up to 10 kg
· Multi-stage power reduction for heating smaller parts
· Silent in operation
· 3 years manufacturer warranty
· Scope of delivery (1x Simatherm IH 025 VOLCANO, 1x User manual, 1x 
  Temperature probe, 1x Carrying bag, 1x Protective gloves, 1x Power cord)



IH 025 VOLCANO (230V/110V)

2024 Simatherm  SIMATEC Other Parts & Accessories IH 025 VOLCANO (230V/110V) Induction Heater  Other Parts & Accessories Spare Parts & Accessories

IH 025 VOLCANO (230V/110V) Induction Heater 

*Please state the type of power voltage used (230V/110V). *Lead time 3-4 weeks upon order confirmation. World's first controllable induction heater with an app The IH 045 is suitable for heating small and medium-sized workpieces up to 45 kg. Due to the external induction coil, the unit works extremely efficiently. The power can be adjusted in eight stages if required. · Connectivity with the "simatec World of Maintenance" app · Remote control · For rolling bearings weighing up to 45 kg · For workpieces with an inner diameter of 20 to 310 mm · Available for voltages of 100, 115 and 230 V · 8-stage power consumption combined with smaller yokes, allows smaller bearings to be heated safely and quickly with less energy · Extendable bearing support arms · Smallest and fastest device in its performance class · Smallest external induction coil · Supplied with three yokes as standard · Particularly compact design - including the yokes only 17 kg in weight · 3 years manufacturer warranty · Can heat a 28 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy · Automatic demagnetization · Scope of delivery(1x simatherm IH 045, 1x Quick instruction guide, 1x Temperature probe, 1x Protective gloves, 1x Power cord, 1x Yoke 14x14 for bearings with a bore diameter from 20 mm, 1x Yoke 28x28 for bearings with a bore diameter from 40 mm, 1x Yoke 42.5x42.5 for bearings with a bore diameter from 60 mm)

2024 Simatherm  SIMATEC Other Parts & Accessories IH 045 (230V/120V) Induction Heater Other Parts & Accessories Spare Parts & Accessories

IH 045 (230V/120V) Induction Heater

*Please state the type of power voltage used (230V/115V). *Lead time 3-4 weeks upon order confirmation. The popular all-round heater for flexible use. The IH 070 is suitable for heating small and medium-sized workpieces up to 120 kg. Due to the external induction coil, the unit works extremely efficiently. The power can be adjusted in four stages if required. · For rolling bearings weighing up to 120 kg · For workpieces with an inner diameter of 20 to 400 mm · Swivel arm available as an option · 5-stage power consumption combined with smaller yokes, allows smaller bearings to be heated safely and quickly with less energy · Supplied with three yokes as standard · Particularly compact design - including the yokes only 35 kg in weight · 3 years manufacturer warranty · Can heat a 65 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy · Automatic demagnetization · Scope of delivery(1x simatherm IH 070, 1x User manual, 1x Temperature probe, 1x Protective gloves, 1x Power cord, 1x Yoke 14x14 for bearings with a bore diameter from 20 mm, 1x Yoke 28x28 for bearings with a bore diameter from 40 mm, 1x Yoke 55x55 for bearings with a bore diameter from 78 mm)

2024 Simatherm  SIMATEC Other Parts & Accessories IH 070 (230V/115V) Induction Heater Other Parts & Accessories Spare Parts & Accessories

IH 070 (230V/115V) Induction Heater

*Lead time 3-4 weeks upon order confirmation. The compact heater for serial production The IH 090 induction heater is suitable for heating medium to large workpieces weighing up to 150 kg. As standard, the IH 090 has a swivel arm and three yokes. Thanks to its integrated air cooling system, the IH 090 is suitable for series assembly and continuous operation. · For rolling bearings weighing up to 150 kg · For workpieces with an inner diameter of 20 to 400 mm · Fan cooling for continuous operation · Particularly compact design - including the yokes weighing only 38 kg · Induction coil outside of the housing, shortens the heating times and reduces energy consumption · Can heat a 90 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy · 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy · Automatic demagnetization · Supplied with three yokes as standard · Swivel arm including yoke adapter so that swivel arm can also be used with small yokes · 3 years manufacturer warranty · Scope of delivery(1x simatherm IH 090, 1x User manual, 1x Temperature probe, 1x Power cord, 1x Protective gloves, 1x Swivel arm, 1x Yoke adapter, 1x Yoke 14x14 for bearings with bore diameter from 20 mm, 1x Yoke 28x28 for bearings with bore diameter from 40 mm, 1x Yoke 55x55 for bearings with bore diameter from 78 mm)

2024 Simatherm  SIMATEC Other Parts & Accessories IH 090, Induction Heater with cooling fan (400-460V)  Other Parts & Accessories Spare Parts & Accessories

IH 090, Induction Heater with cooling fan (400-460V) 

*Please state the type of power voltage used (200V/400V). *Lead time 3-4 weeks upon order confirmation. The most powerful table-top heater The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing.  · For rolling bearings weighing up to 300 kg · Extremely simple operation thanks to the sliding yoke · Available for voltages of 200, 400–480 and 500–575V · Induction coil outside of the housing, shortens the heating times and reduces energy consumption · Particularly compact design - including the yokes only 75 kg in weight · Automatic demagnetization · 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy · For workpieces with an inner diameter of 60 to 640 mm · Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy · 3 years manufacturer warranty · Scope of delivery(1x simatherm IH 210, 1x User manual, 1x Temperature probe, 1x Power cord, 1x Protective gloves, 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm, 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm)

2024 Simatherm  SIMATEC Other Parts & Accessories IH 210 (200V/400V) Induction Heater Other Parts & Accessories Spare Parts & Accessories

IH 210 (200V/400V) Induction Heater

*Lead time 3-4 weeks upon order confirmation. The most powerful table-top heater The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing. As a special version, the IH 210 is equipped with fan cooling (IH 210F) for continuous operation. · For rolling bearings weighing up to 300 kg · Extremely simple operation thanks to the sliding yoke · Available for voltages of 200, 400–480 and 500–575V · Induction coil outside of the housing, shortens the heating times and reduces energy consumption · Particularly compact design - including the yokes only 75 kg in weight · Automatic demagnetization · 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy · For workpieces with an inner diameter of 60 to 640 mm · Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy · 3 years manufacturer warranty · Scope of delivery(1x simatherm IH 210F, 1x User manual, 1x Temperature probe, 1x Power cord, 1x Protective gloves, 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm, 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm)

Spare Parts & Accessories For Sale

Buy new and used Spare Parts & Accessories