Maintenance & Repair Services

Spare Parts & Accessories

SIMATEC

Singapore

*Lubricant must be provided by buyer.

Since Simalube lubricators are precision engineering products. We do advise you to do gas generator exchange and refill lubricant with our well-trained technician. This is to make sure your lubricator always in the best condition to protect your assets.

Singapore Mainland

15ml Auto-Lubricator Gas Generator Exchange & Refill service (Excluding Lubricant)

30ml Auto-Lubricator Gas Generator Exchange & Refill Service (Excluding Lubricant)

60ml Auto-Lubricator Gas Generator Exchange and Refill Service (Excluding Lubricant)

*Lubricant must be provided by the buyer. 

Since Simalube lubricators are precision 
engineering products. We do advise you to do gas generator exchange and refill lubricant with our well-trained technician. This is to make sure your lubricator is always in the best condition to protect your assets.


*Lubricant must be provided by the buyer. Since Simalube lubricators are precision 
engineering products. We do advise you to do gas generator exchange and refill lubricant with our well-trained technician. This is to make sure your lubricator is always in the best condition to protect your assets.


125ml Auto-Lubricator Gas Generator Exchange and Refill Service (Excluding Lubricant)

*Lubricant must be provided by the buyer. 
Since Simalube lubricators are precision engineering products. We do advise you to do gas generator exchange and refill lubricant with our well-trained technician. This is to make sure your lubricator is always in the best condition to protect your assets.


250ml Auto-Lubricator Gas Generator Exchange and Refill Service (Excluding Lubricant)

*Empty with self-filling with Grease

*Lead time 3-4 weeks upon order confirmation
*Refilling service excluded. 

Enhance the performance and durability of your rotating machinery components with the Simalube 125ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs.


Simalube 125ML Automatic Lubricator:

- Unlimited range of uses in any location, confined 
   and hard-to-reach spaces
- Freely selectable dispensing cycle of 1 to 12 
   months
- IP68 certified and EX certified for all zones
- Environmental sustainability, easy disposal at the 
   end of the dispensing cycle
- Simalube can be refilled up to 3 times
- No more manual lubrication that resulted in 
   under-lubrication or over-lubrication with less 
   machine downtime and an increase in machine 
   performance
- Easy installation and cost-saving solution 
   suitable for a wide range of industries. The 
   simalube automatic lubrication system is used in 
   a wide variety of applications. The lubricant 
   dispensers are available with a wide standard 
   range of greases and oils and can be used both 
   under water and in potentially explosive areas 
   (ATEX).

Applications of simalube single-point lubricators:

-pump
-motor engine
-rolling bearings
-chains
-conveyor belts
-gears
-lifting systems
-linear/sliding guides
-threaded spindles
-ventilation system (HVAC Heating, ventilation, and 
  air-conditioning)

Refill Service:
https://antbuildz.com/buy/equipment/6748147ecc1d6007ca9ec443

*Lead time 3-4 weeks upon order confirmation
*Refilling service excluded. (With refilling service 
  please visit XXXXXXXXXX) 

Enhance the performance and durability of your rotating machinery components with the Simalube 125ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs.


Simalube 125ML Automatic Lubricator:

- Unlimited range of uses in any location, confined 
   and hard-to-reach spaces
- Freely selectable dispensing cycle of 1 to 12 
   months
- IP68 certified and EX certified for all zones
- Environmental sustainability, easy disposal at the 
   end of the dispensing cycle
- Simalube can be refilled up to 3 times
- No more manual lubrication that resulted in 
   under-lubrication or over-lubrication with less 
   machine downtime and an increase in machine 
   performance
- Easy installation and cost-saving solution 
   suitable for a wide range of industries. The 
   simalube automatic lubrication system is used in 
   a wide variety of applications. The lubricant 
   dispensers are available with a wide standard 
   range of greases and oils and can be used both 
   under water and in potentially explosive areas 
   (ATEX).

Applications of simalube single-point lubricators:

-pump
-motor engine
-rolling bearings
-chains
-conveyor belts
-gears
-lifting systems
-linear/sliding guides
-threaded spindles
-ventilation system (HVAC Heating, ventilation, and 
  air-conditioning)


Simalube 125ml Empty for Self-Filling with Grease

Leading Simatec Distributor in Singapore &Ai CCTV solution provider. 

Next-Gen Efficiency: Bearings/Chains Maintenance Solutions & Ai Video Surveillance Systems

Why buy with us?

No more expensive buying rate! We help you discover the best market rates throughout Singapore.

Best Prices

Get professional advise on installation . We help you to site and propose the most suitable solution for you. 

Perfect Solution

We have multiple solutions ready. There is always one that suitable for your case.

Flexible

Have information of all available equipment at one glance.

Transparency & Security

Millions of simalube lubricators are used worldwide in every industry. They are the best and most economical solution for the continuous supply of grease or oil for periods of up to one year. Simalube single point come with 15ml, 30ml, 60ml, 125ml and 250ml.

About Simalube

Continuous lubrication ensures low costs and high reliability

Since Simalube Automatic lubricators are precision engineering products. It is best to leave it to our well-trained technicians to help you do the refill and exchange of gas generator. Believe us, we own the best way to keep your lubricator device in optimum condition.

REFILL your lubricator devices!

We Offer Lubricant Refill Service & Gas Generator Exchange

We have experienced in installation in over 24 industries. All machine with chains, conveyors, electric motors, gear, lifting system, linear guides, pump, rolling bearing  and many more can be install with SIMALUBE for automation of lubricating.

SIMALUBE

Applicable in all Moving and Rotating part on Earth!

According to customer feedback,

Before SIMALUBE, 
Operator have to manually pump the grease for excavator 2 hours before every operating day. 😔 

After SIMALUBE,
Operator only do refill for the lubricator once per month. 😲 

SIMALUBE with precise lubrication helping the excavator moving parts to prolong their life span. Zero contaminants in the lubricant since SIMALUBE is a fully enclosed lubrication system. With the flexibility of SIMALUBE that comes with different size, it is proved can work in almost every industries. 

Application in Excavator

Professional lubrication of Excavators

Forklifts are in operation around the clock and must be able to withstand the highest loads at all times. One challenge here is the constant and precise lubrication of the numerous lubrication points - a task that is solved reliably and efficiently with the simalube automatic lubricator from simatec.

Application in Forklift

Simalube automatic lubrication system in the Forklift Machine

A crane and its components are exposed to all weather conditions and many dirt emissions. The components of a crane must therefore be supplied with sufficient lubricant at all times. The Simalube automatic lubricant dispenser ensures a permanent supply of grease or oil to the bearings over periods of one to 12 months and thus offers the perfect solution for the automatic lubrication of rolling bearings. Such precise and continuous lubrication as with the Simalube lubricant dispenser is not even possible manually. The automatic lubrication of bearings, the continuous, reliable supply of lubricant to the lubrication points, guarantee reliable operation of the equipment even under adverse environmental conditions.

Application in Crane

Automatic lubrication of cranes 

Simatherm heating devices can be used to efficiently heat rolling bearings and other ring-shaped metal parts. They enable fast and clean assembly and replace conventional heating methods such as hotplates, hot oil baths, open flames and ovens. During the heating process, only the workpiece heats up, but the device remains cold. Simatherm induction heating devices are used for workpieces weighing up to 300 kg.

About Simatherm

Perfect solutions for gentle and fast mounting of rolling bearings

The heating of rolling bearings and ring-shaped metal parts by induction has proved to be an excellent method for installing these parts with both speed and care. An alternating electro-magnetic field induces a high current directly in the workpiece and raises this precisely to the prescribed installation temperature in a controlled manner.

SIMATHERM

Heating with induction

Without the right special tools, the professional mounting and dismounting of bearings and shaft seals is simply impossible. With Simatool tools, rolling bearings and radial shaft seals can be fitted and removed quickly and safely. The well thought-out tools are ergonomically optimally designed and have also been tried and tested in practice. As a result, all work can be carried out significantly faster, safer and more gently without damaging neighboring machine elements.

About Simatool

Quality tools for the installation and removal of bearings and seals

Enhance safety and maximize productivity by leveraging existing cameras to gain real-time
actionable insights and make informed decisions.

Ai Video Surveillance Systems

Enhance workplace security with cutting-edge AI Surveillance technology, ensuring a safe
environment through advanced monitoring and analysis capabilities

AiSafety

Advanced AI Surveillance for a Safer Workplace

Enhance efficiency and foster innovation with AiProductivity, utilizing intelligent automation to
optimize workflows and spark creativity.

AiProductivity

Boosting Efficiency and Innovation with Intelligent Automation

Advance workplace efficiency with state-of-the-art AiPeopleRecognition technology, ensuring
streamlined operations through advanced recognition and optimization capabilities

AiPeopleRecognition

Revolutionizing Recognition Technology for Enhanced Workplace Efficiency

Enhance security and convenience with intelligent recognition technology, streamlining vehicle entry and
management.

AiVehicleAccess

Streamlining Vehicle Entry with Intelligent Recognition Technology

FixCamera is a professional solution designed for long-term time-lapse photography, making it the ideal choice for architectural projects. Unlike traditional CCTV time-lapse solutions, FixCamera offers ultra-clear 4K or 6K time-lapse videos. Utilizing the 4G network and cloud server integration, it enables quick access to photos and allows for easy adjustment of camera parameters. This makes it particularly suitable for long term shooting tasks such as construction and energy sector projects.

Time Lapse Camera

Enhance and speed up your time-lapse projects

Titan SmartTech Pte Ltd is a leading provider in advancing business safety, security and maintenance solutions. We connect businesses with a wide range of software, hardware, and cloud vendors, ensuring responsible supply chains and delivering innovative security solutions tailored for diverse organization needs.

Send us a message

Search for your preferred equipment daily, weekly and monthly rental rates in just a click!

Find Transparent Equipment Rental Rates

Why rent with us?

No more expensive rental rate! We help you discover the best market rates throughout Singapore.

Rent your equipment for as short as one day for up to months according to your needs.

Flexible Duration

No more sourcing and negotiating! We help you source and compare quotes within a few clicks.

Fast & Easy

Have information of all available equipment at one glance from well- vetted suppliers.

Some of Our Company Features

Aiusmod tempor incididunt ut labore sed dolore magna aliquay dnim ad minim veniam quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea reprehen deritin voluptate.

ABOUT US

Helping new brands start up & old ones start over.

About Antek Equipments Rental

We Offer Smarter & More Affordable Access To RentConstruction Equipment

Lorem ipsum is placeholder text commonly used in the graphic, print, and publishing industries for previewing layouts and visual mockups.

Antek has over 10 years of experience in Technology.

Meet the most advanced live website builder on WordPress. Featuring latest web technologies, enjoyable UX and the most beautiful design trends.

Titan SmartTech Pte. Ltd.

125ml Single Point Automatic Lubricator

*For Tower Crane 

-High quality imaging with 4 MP resolution
-Clear imaging against strong backlight due to 120 dB WDR technology
-Efficient H.265+ compression technology
-Focus on human and vehicle classification based on deep learning
-Provide real-time security via built-in two-way audio
-Active strobe light and audio alarm to warn intruders off
-Support on-board storage up to 512 GB (SD card slot)
-Water and dust resistant (IP67)

*The above is only for the whole unit and 
  the electronics
*Things not included are the NVR, HDD 
  required for storage and installation 
  which is subjected to to actual site 
  conditions
*For estimation to handle the above 2 
  points, per camera it can be assumed 
  to have an additional $300 of cost 
  (which has been factored into the 
  calculation)
*All hardware warranty is for 1 year

*For Tower Crane 

-High quality imaging with 4 MP resolution
-Clear imaging against strong backlight due to 120 dB WDR technology
-Efficient H.265+ compression technology
-Focus on human and vehicle classification based on deep learning
-Provide real-time security via built-in two-way audio
-Active strobe light and audio alarm to warn intruders off
-Support on-board storage up to 512 GB (SD card slot)
-Water and dust resistant (IP67)

Tower Crane CCTV (4MP Fixed Network Camera) 

Simatool Bearing Handling Tool BHT 200-400 (max. lifting force 150 kg)

The safe solution for handling medium, large and very large bearings

The Bearing Handling Tool is ideally suited for professionally and securely lifting large, heavy bearings.
The BHT reduces the risk of accidents and bearing damage. The BHT encloses the outer race of the bearing with a steel band. With two handles on opposite sides and two carrying belts, the bearing can be easily transported with a lifting crane. The bore remains open so the bearings can be easily placed onto a shaft. With the Bearing Handling Tool, bearings can be both horizontally and vertically fitted onto a shaft. Two anti-twist devices, which are fastened against the inner race, ensure that the inner race of the bearing does not turn out of control.

· Bearing bore remains free for mounting on shaft
· Mounting on shaft in horizontal and vertical position possible
· Avoidance of accident risk
· Can be used in combination with Simatherm induction heaters
· TÜV SÜD certified
· Scope of delivery(2 carrying belts, 2 high-quality handles, 1 pair of 
  protective gloves, 2 turning handles for safe handling, 2 steel clamping 
  strips, 2 inner race fasteners)


Bearing Handling Tool 200-400

*Lead time 3-4 weeks upon order confirmation.

Fitting Tool FT 33 helps prevent premature bearing failure

Improper mounting, in particular incorrectly applied mounting forces, are responsible for approx. 16% of all premature bearing failures. The simatool FT 33 rolling bearing fitting tool guarantees fast, precise and safe fitting of bearings with bore diameters from 10 to 50 mm. The correct combination of impact ring and impact sleeve ensures that the installation forces are never transmitted via the rolling elements of the bearing.

· For bearing installation on the shaft, in the housing or on shaft and in housing at the same time
· The inner and outer diameters of the impact rings are precisely matched to the dimensions of the 
  rolling bearings · Extremely impact-resistant material for high durability of the impact rings and 
  impact sleeves
· The impact rings are pressed onto the impact sleeves, so that no independent loosening of the 
  impact rings is possible
· Also suitable for the installation of sockets, seals, pulleys, etc.
· Suitable for 222 different rolling bearing sizes
· Simatool Fitting Tool FT-P is the ideal supplement for working with presses and installation forces up 
  to 5 tons
· Fast, precise and safe installation of bearings and seals
· Impact rings are clearly marked for quick and easy selection
· All components from case are available as spare parts
· Rolling bearings have significantly longer service life due to proper mounting
· Thanks to the special DC adapter of the FT-P tool, the C-rings of the simatool FT 33 can also be used 
  on presses
· Scope of delivery (33 plastic nylon impact rings, 3 aluminum impact sleeves, 1 non-rebound 
  hammer)


Fitting Tool FT33

The tool for efficient dismounting of deep groove ball bearings

With the extractor tool BP 61, deep groove ball bearings can be removed from the shaft. It is also equally suited for removing bearings from just a shaft. Even sealed bearings can be dismounted once the seal is removed. The hooks of the puller arms are placed in the outer ring. The toolset can be used with 70 different kinds of deep groove ball bearings with diameters of 10 to 100 mm.

· The hooks of the puller arms latch directly into the outer raceway and support themselves on the 
  shoulder of the inner ring, creating a secure hold and optimal power transfer
· The hooks are spring-mounted onto the puller arms so that they can easily fit into the bearing
· The high-quality steel puller arms are resilient and intended for long-lasting use
· For shaft diameters measuring from 10–100 mm
· All components are available as spare parts
· An elastomer locking ring simplifies the attachment of the puller arms and holds them in position 
  during the extraction process
· The elastic locking ring simplifies tool set-up and holds the puller arms in position during extraction
· The puller can also be used to remove sealed bearings from blind housings after the seal has been 
  removed
· Retaining flap simplifies attachment of the puller arms to the spindle and holds them in 
  position
· Scope of delivery(6 sets with 3 puller arms each, 2 spindles, 1 counter bracket)


Bearing Puller BP 61 

*Lead time 3-4 weeks upon order confirmation.

The ideal solution for removing deep groove ball bearings from the shaft and housing
The BP 160 Bearing Puller enables the professional removal of deep groove ball bearings. Sealed bearings can also be removed after the corresponding seal has been removed. The ball adapters of the pull rod are inserted in the bearing race and then rotated by 90 degrees to ensure a secure hold. The BP 160 Bearing Puller makes it possible to remove more than 50 different deep groove ball bearings, with an inner diameter of 30 to 160 mm.

· With the help of extensions, even hard-to-reach bearings can be easily expanded. A bearing 
  selection table is enclosed in the tool case.
· The removal tool BP 160 is suitable for the removal of deep groove ball bearings, from the shaft and 
  from the housing.
· Professional removal of deep groove ball bearings
· Adjacent parts do not need to be removed or dismantled
· An ideal addition to the Simatool B P 61 Bearing Puller
· For deep groove ball bearings with an inner diameter of 30 to 160 mm · All components are 
  available as spare parts
· Quick and safe selection through labelling of the bearing adapters
· Pulling off ball bearings without removing the shaft
· Mechanical pressure spindle designed for high removal forces
· Scope of delivery (Pulling arm support beam G 1/2, Spindle G1/2, 2 pull rods, 2 extensions, Ball 
  adapter A7 – A12)


Bearing Puller BP 160

*Please state your use cases in detail 
*Use case can refer catalogue

Deliverable:

Software
1) 1 Year License
2) Allow selection of up to 3 Use Cases Each
3) Web Dashboard
4) Alert Image + Preview Video
5) Telegram Alerts
6) 1 Year storage of Alert Information
7) Configuration and Networking
8) Unlimited Account User Creation
9) Unlimited Report Generation

Hardware
1) 4x Fixed Bullet Cameras
2) 1x 8 Channel Network Video Recorder (NVR) with 6TB HDD to support up to 8 cameras
3) AI Hardware PC (Supports up to 8 cameras)

Professional Services
1) Delivery, Installation, Setup
2) Maintenance, Support
3) Testing and commissioning of cameras
4) Remote viewing configuration

Training
1) 2 Hour Training For Any Number Of Users

*Please state your use cases 

Deliverable:

Software
1) 1 Year License
2) Allow selection of up to 3 Use Cases Each
3) Web Dashboard
4) Alert Image + Preview Video
5) Telegram Alerts
6) 1 Year storage of Alert Information
7) Configuration and Networking
8) Unlimited Account User Creation
9) Unlimited Report Generation

Hardware
1) 4x Fixed Bullet Cameras
2) 1x 8 Channel Network Video Recorder (NVR) with
     6TB HDD to support up to 8 cameras
3) AI Hardware PC (Supports up to 8 cameras)

Professional Services
1) Delivery, Installation, Setup
2) Maintenance, Support
3) Testing and commissioning of cameras
4) Remote viewing configuration

Training
1) 2 Hour Training For Any Number Of Users

Ai Video Surveillance Systems (4 New Camera 3 use Cases)

Ai Video Surveillance Systems (4 New Camera 3 use Cases)-AiSafety

*Empty with self-filling with Grease
*Refill Service excluded.

* Lead time: 3 to 4 weeks upon order confirmation&nbsp;Enhance the performance and durability of your rotating machinery components with the Simalube 15ml Automatic Lubricator.<ul><li>Ensures continuous and precise lubrication, reducing downtime and maintenance costs.</li><li>Unlimited range of uses in any location, confined and hard-to-reach spaces</li><li>Freely selectable dispensing cycle of 1 to 12 months</li><li>IP68 certified and EX certified for all zones</li><li>environmental sustainability, easy disposal at the end of the dispensing cycle</li><li>Can be refilled up to 3 times</li><li>No more manual lubrication that resulted in under-lubrication or over-lubrication with less machine downtime and an increase in machine performance</li><li>Easy installation and cost-saving solution suitable for a wide range of industries and broad variety of applications</li><li>The lubricant dispensers are available with a wide standard range of greases and oils and can be used both under water and in potentially explosive areas (ATEX)</li><li>Example of applications are pump, motor engine, rolling bearings, chains, conveyor belts, gears, lifting systems, linear/sliding guides, threaded spindles, ventilation system for HVAC (Heating, Ventilation, and Air-Conditioning)</li></ul>

Refill Service : https://antbuildz.com/buy/equipment/674811f6cc1d6007ca9eafca

* Lead time: 3 to 4 weeks upon order confirmation&nbsp;Enhance the performance and durability of your rotating machinery components with the Simalube 15ml Automatic Lubricator.<ul><li>Ensures continuous and precise lubrication, reducing downtime and maintenance costs.</li><li>Unlimited range of uses in any location, confined and hard-to-reach spaces</li><li>Freely selectable dispensing cycle of 1 to 12 months</li><li>IP68 certified and EX certified for all zones</li><li>environmental sustainability, easy disposal at the end of the dispensing cycle</li><li>Can be refilled up to 3 times</li><li>No more manual lubrication that resulted in under-lubrication or over-lubrication with less machine downtime and an increase in machine performance</li><li>Easy installation and cost-saving solution suitable for a wide range of industries and broad variety of applications</li><li>The lubricant dispensers are available with a wide standard range of greases and oils and can be used both under water and in potentially explosive areas (ATEX)</li><li>Example of applications are pump, motor engine, rolling bearings, chains, conveyor belts, gears, lifting systems, linear/sliding guides, threaded spindles, ventilation system for HVAC (Heating, Ventilation, and Air-Conditioning)</li></ul>

Simalube 15ml empty for self-filling with grease 

15ml Single-Point Automatic lubricator

*Lead time 3-4 weeks upon order confirmation.

The Seal Puller SP 50 helps with the professional removal of redial shaft seals

The incorrect dismounting of radial shaft seals can damage shafts, housings, and ball bearings. The Seal Puller SP 50 helps to avoid extra costs by dismounting seals quickly and easily. Even seals that are recessed into a housing can be professionally removed. Practically any seal can be extracted with the help of the extensions.

· Many different seal varieties can be removed in only 10 to 30 seconds
· The removal can be completed without the hassle of dismounting neighboring parts
· All components available as spare parts
· The toolkit removes radial shaft seals without damaging the shaft or housing
· Dismantling the gear housing is no longer necessary
· In combination with the BP 61 it is available as a set in the simatool TP 150
· Scope of delivery (50 special screws for extracting radial shaft seals, 20 distance sleeves, 2 extensions, 
  1 steel sliding hammer)


Seal Puller SP 50

*Empty with self-filling with Oil

*Lead time 3-4 weeks upon order confirmation
*Refilling service excluded.

Enhance the performance and durability of your rotating machinery components with the Simalube 250ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs.


Simalube 250ML Automatic Lubricator:

- Unlimited range of uses in any location, confined 
   and hard-to-reach spaces
- Freely selectable dispensing cycle of 1 to 12 
   months
- IP68 certified and EX certified for all zones
- Environmental sustainability, easy disposal at the 
   end of the dispensing cycle
- Simalube can be refilled up to 3 times
- No more manual lubrication that resulted in 
   under-lubrication or over-lubrication with less 
   machine downtime and an increase in machine 
   performance
- Easy installation and cost-saving solution 
   suitable for a wide range of industries. The 
   Simalube automatic lubrication system is used in 
   a wide variety of applications. The lubricant 
   dispensers are available with a wide standard 
   range of greases and oils and can be used both 
   under water and in potentially explosive areas 
   (ATEX).

Applications of Simalube single-point lubricators:

-pump
-motor engine
-rolling bearings
-chains
-conveyor belts
-gears
-lifting systems
-linear/sliding guides
-threaded spindles
-ventilation system (HVAC Heating, ventilation, and 
  air-conditioning)

Refill Service:
https://antbuildz.com/buy/equipment/67481523cc1d6007ca9ec852

*Lead time 3-4 weeks upon order confirmation
*Refilling service excluded. (With refilling service 
  please visit XXXXXXXXXX) 

Enhance the performance and durability of your rotating machinery components with the Simalube 250ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs.


Simalube 250ML Automatic Lubricator:

- Unlimited range of uses in any location, confined 
   and hard-to-reach spaces
- Freely selectable dispensing cycle of 1 to 12 
   months
- IP68 certified and EX certified for all zones
- Environmental sustainability, easy disposal at the 
   end of the dispensing cycle
- Simalube can be refilled up to 3 times
- No more manual lubrication that resulted in 
   under-lubrication or over-lubrication with less 
   machine downtime and an increase in machine 
   performance
- Easy installation and cost-saving solution 
   suitable for a wide range of industries. The 
   Simalube automatic lubrication system is used in 
   a wide variety of applications. The lubricant 
   dispensers are available with a wide standard 
   range of greases and oils and can be used both 
   under water and in potentially explosive areas 
   (ATEX).

Applications of Simalube single-point lubricators:

-pump
-motor engine
-rolling bearings
-chains
-conveyor belts
-gears
-lifting systems
-linear/sliding guides
-threaded spindles
-ventilation system (HVAC Heating, ventilation, and 
  air-conditioning)


Simalube 250ml Empty for Self-Filling with Oil

250ml Single Point Automatic Lubricator

*Empty with self-filling with Grease

*Lead time 3-4 weeks upon order confirmation
*Refill Service excluded.
Enhance the performance and durability of your rotating machinery components with the Simalube 30ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs.


Simalube 30ML Automatic Lubricator:

- Unlimited range of uses in any location, confined and hard-to-reach 
   spaces
- Freely selectable dispensing cycle of 1 to 12 months
- IP68 certified and EX certified for all zones
- Environmental sustainability, easy disposal at the end of the dispensing 
   cycle
- Simalube can be refilled up to 3 times
- No more manual lubrication that resulted in under-lubrication or over- 
   lubrication with less machine downtime and an increase in machine 
   performance
- Easy installation and cost-saving solution suitable for a wide range of 
   industries. The simalube automatic lubrication system is used in a wide 
   variety of applications. The lubricant dispensers are available with a wide 
   standard range of greases and oils and can be used both under water 
   and in potentially explosive areas (ATEX).

Applications of simalube single-point lubricators:

-pump
-motor engine
-rolling bearings
-chains
-conveyor belts
-gears
-lifting systems
-linear/sliding guides
-threaded spindles
-ventilation system (HVAC Heating, ventilation, and air-conditioning)

Refill Service: https://antbuildz.com/buy/equipment/674812fbcc1d6007ca9eb8dc


*Lead time 3-4 weeks upon order confirmation

Enhance the performance and durability of your rotating machinery components with the Simalube 30ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs.


Simalube 30ML Automatic Lubricator:

- Unlimited range of uses in any location, confined and hard-to-reach 
   spaces
- Freely selectable dispensing cycle of 1 to 12 months
- IP68 certified and EX certified for all zones
- Environmental sustainability, easy disposal at the end of the dispensing 
   cycle
- Simalube can be refilled up to 3 times
- No more manual lubrication that resulted in under-lubrication or over- 
   lubrication with less machine downtime and an increase in machine 
   performance
- Easy installation and cost-saving solution suitable for a wide range of 
   industries. The simalube automatic lubrication system is used in a wide 
   variety of applications. The lubricant dispensers are available with a wide 
   standard range of greases and oils and can be used both under water 
   and in potentially explosive areas (ATEX).

Applications of simalube single-point lubricators:

-pump
-motor engine
-rolling bearings
-chains
-conveyor belts
-gears
-lifting systems
-linear/sliding guides
-threaded spindles
-ventilation system (HVAC Heating, ventilation, and air-conditioning)


Simalube 30ml Empty for Self-Filling with Grease

30ml Single Point Automatic Lubricator

*For mobile CCTV with solar power.

-High quality imaging with 4 MP resolution
-Clear imaging against strong backlight due to 120 dB WDR technology
-Efficient H.265+ compression technology
-Focus on human and vehicle classification based on deep learning
-Provide real-time security via built-in two-way audio
-Active strobe light and audio alarm to warn intruders off
-Support on-board storage up to 512 GB (SD card slot)
-Water and dust resistant (IP67)

*The above is only for the whole unit and 
  the electronics
*Things not included are the NVR, HDD 
  required for storage and installation 
  which is subjected to to actual site 
  conditions
*For estimation to handle the above 2 
  points, per camera it can be assumed 
  to have an additional $300 of cost 
  (which has been factored into the 
  calculation)
*All hardware warranty is for 1 year

*For mobile CCTV with solar power.

-High quality imaging with 4 MP resolution
-Clear imaging against strong backlight due to 120 dB WDR technology
-Efficient H.265+ compression technology
-Focus on human and vehicle classification based on deep learning
-Provide real-time security via built-in two-way audio
-Active strobe light and audio alarm to warn intruders off
-Support on-board storage up to 512 GB (SD card slot)
-Water and dust resistant (IP67)

Mobile CCTV with Solar Power (4MP Fixed Network Camera)

*Please state your use cases in detail.
*Please provide your existing camera spec.
*Use cases can refer catalogue

Deliverable:

Software
1) 1 Year License
2) Allow selection of up to 3 Use Cases Each
3) Web Dashboard
4) Alert Image + Preview Video
5) Telegram Alerts
6) 1 Year storage of Alert Information
7) Configuration and Networking
8) Unlimited Account User Creation
9) Unlimited Report Generation

Hardware
1) AI Hardware PC (Supports up to 4 existing
cameras)
Note: Customer must install 4 of their own IP
cameras as this is not part of the package

Professional Services
1) Delivery, Installation, Setup
2) One Time Hardware Relocation
3) Maintenance, Support

Training
1) 2 Hour Training For Any Number Of Users

*Please state your use cases in detail.
*Please provide your existing camera spec.

Deliverable:

Software
1) 1 Year License
2) Allow selection of up to 3 Use Cases Each
3) Web Dashboard
4) Alert Image + Preview Video
5) Telegram Alerts
6) 1 Year storage of Alert Information
7) Configuration and Networking
8) Unlimited Account User Creation
9) Unlimited Report Generation

Hardware
1) AI Hardware PC (Supports up to 4 existing
cameras)
Note: Customer must install 4 of their own IP
cameras as this is not part of the package

Professional Services
1) Delivery, Installation, Setup
2) One Time Hardware Relocation
3) Maintenance, Support

Training
1) 2 Hour Training For Any Number Of Users

AI Video Surveillance Systems (Leverage 4 Existing Camera 3 Use Cases)

AI Video Surveillance Systems (Leverage 4 Existing Camera 3 Use Cases)-AiSafety

*Lead time 3-4 weeks upon order confirmation.

Professional dismounting of deep groove ball bearings and radial shaft seals

The Simatool Twin Puller TP 150 can be used to expertly dismount deep groove ball bearings and radial shaft seals. Bearings with a tight fit on the inner or outer ring can be quickly and reliably dismounted with the help of this tool. The TP 150 can also be used to dismount shaft seals, thus making it a unique and professional dismounting tool.

· Three dismounting functions in one tool set: dismounting deep groove ball bearings with shaft, 
  dismounting deep groove ball bearings without shaft, dismounting of radial shaft seals
· Perfect complement to the well-proven simatool Fitting Tool FT 33
· All components are available as spare parts
· Suitable for shaft diameters from 10 to 100 mm and external diameters up to 150 mm
· Compact toolset includes a selection table in a handy case
· Case weight of 6.6 kg suitable for mobile use
· Scope of delivery(6 sets of extraction arms (A1–A6), 2 threaded spindles (SW 19), 9 support washers (Ø 10–75 mm), Sliding hammer, Extension for sliding hammer, 50 tapping screws, 10 spacer rings)


Twin Puller TP 150

*Empty with self-filling with Oil
*Refill service excluded.

* Lead time: 3 to 4 weeks upon order confirmation&nbsp;Enhance the performance and durability of your rotating machinery components with the Simalube 15ml Automatic Lubricator.<ul><li>Ensures continuous and precise lubrication, reducing downtime and maintenance costs.</li><li>Unlimited range of uses in any location, confined and hard-to-reach spaces</li><li>Freely selectable dispensing cycle of 1 to 12 months</li><li>IP68 certified and EX certified for all zones</li><li>environmental sustainability, easy disposal at the end of the dispensing cycle</li><li>Can be refilled up to 3 times</li><li>No more manual lubrication that resulted in under-lubrication or over-lubrication with less machine downtime and an increase in machine performance</li><li>Easy installation and cost-saving solution suitable for a wide range of industries and broad variety of applications</li><li>The lubricant dispensers are available with a wide standard range of greases and oils and can be used both under water and in potentially explosive areas (ATEX)</li><li>Example of applications are pump, motor engine, rolling bearings, chains, conveyor belts, gears, lifting systems, linear/sliding guides, threaded spindles, ventilation system for HVAC (Heating, Ventilation, and Air-Conditioning)</li></ul>

Refill Service : https://antbuildz.com/buy/equipment/674811f6cc1d6007ca9eafca

Simalube 15ml Empty with Self-Filling with Oil

15ml Single Point Automatic Lubricator

*Empty with self-filling with Grease

*Lead time 3-4 weeks upon order confirmation
*Refilling service excluded.

Enhance the performance and durability of your rotating machinery components with the Simalube 60ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs.


Simalube 60ML Automatic Lubricator:

- Unlimited range of uses in any location, confined 
   and hard-to-reach spaces
- Freely selectable dispensing cycle of 1 to 12 
   months
- IP68 certified and EX certified for all zones
- Environmental sustainability, easy disposal at the 
   end of the dispensing cycle
- Simalube can be refilled up to 3 times
- No more manual lubrication that resulted in 
   under-lubrication or over-lubrication with less 
   machine downtime and an increase in machine 
   performance
- Easy installation and cost-saving solution 
   suitable for a wide range of industries. The 
   simalube automatic lubrication system is used in 
   a wide variety of applications. The lubricant 
   dispensers are available with a wide standard 
   range of greases and oils and can be used both 
   under water and in potentially explosive areas 
   (ATEX).

Applications of simalube single-point lubricators:

-pump
-motor engine
-rolling bearings
-chains
-conveyor belts
-gears
-lifting systems
-linear/sliding guides
-threaded spindles
-ventilation system (HVAC Heating, ventilation, and 
  air-conditioning)

Refill Service:
https://antbuildz.com/buy/equipment/674813d8cc1d6007ca9ec0ea

*Lead time 3-4 weeks upon order confirmation
*Refilling service excluded.(With refilling service 
  please visit XXXXXXXXXX) 

Enhance the performance and durability of your rotating machinery components with the Simalube 60ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs.


Simalube 15ML Automatic Lubricator:

- Unlimited range of uses in any location, confined 
   and hard-to-reach spaces
- Freely selectable dispensing cycle of 1 to 12 
   months
- IP68 certified and EX certified for all zones
- Environmental sustainability, easy disposal at the 
   end of the dispensing cycle
- Simalube can be refilled up to 3 times
- No more manual lubrication that resulted in 
   under-lubrication or over-lubrication with less 
   machine downtime and an increase in machine 
   performance
- Easy installation and cost-saving solution 
   suitable for a wide range of industries. The 
   simalube automatic lubrication system is used in 
   a wide variety of applications. The lubricant 
   dispensers are available with a wide standard 
   range of greases and oils and can be used both 
   under water and in potentially explosive areas 
   (ATEX).

Applications of simalube single-point lubricators:

-pump
-motor engine
-rolling bearings
-chains
-conveyor belts
-gears
-lifting systems
-linear/sliding guides
-threaded spindles
-ventilation system (HVAC Heating, ventilation, and 
  air-conditioning)



Simalube 60ml Empty for Self-Filling with Grease

60ml Single Point Automatic Lubrication

*Empty with self-filling with grease

*Lead time 3-4 weeks upon order confirmation
*Refilling service excluded. 

Enhance the performance and durability of your rotating machinery components with the Simalube 250ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs.


Simalube 250ML Automatic Lubricator:

- Unlimited range of uses in any location, confined 
   and hard-to-reach spaces
- Freely selectable dispensing cycle of 1 to 12 
   months
- IP68 certified and EX certified for all zones
- Environmental sustainability, easy disposal at the 
   end of the dispensing cycle
- Simalube can be refilled up to 3 times
- No more manual lubrication that resulted in 
   under-lubrication or over-lubrication with less 
   machine downtime and an increase in machine 
   performance
- Easy installation and cost-saving solution 
   suitable for a wide range of industries. The 
   simalube automatic lubrication system is used in 
   a wide variety of applications. The lubricant 
   dispensers are available with a wide standard 
   range of greases and oils and can be used both 
   under water and in potentially explosive areas 
   (ATEX).

Applications of simalube single-point lubricators:

-pump
-motor engine
-rolling bearings
-chains
-conveyor belts
-gears
-lifting systems
-linear/sliding guides
-threaded spindles
-ventilation system (HVAC Heating, ventilation, and 
  air-conditioning)

Refill Service:
https://antbuildz.com/buy/equipment/67481523cc1d6007ca9ec852

*Lead time 3-4 weeks upon order confirmation
*Refilling service excluded. (With refilling service 
  please visit XXXXXXXXXX) 

Enhance the performance and durability of your rotating machinery components with the Simalube 250ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs.


Simalube 250ML Automatic Lubricator:

- Unlimited range of uses in any location, confined 
   and hard-to-reach spaces
- Freely selectable dispensing cycle of 1 to 12 
   months
- IP68 certified and EX certified for all zones
- Environmental sustainability, easy disposal at the 
   end of the dispensing cycle
- Simalube can be refilled up to 3 times
- No more manual lubrication that resulted in 
   under-lubrication or over-lubrication with less 
   machine downtime and an increase in machine 
   performance
- Easy installation and cost-saving solution 
   suitable for a wide range of industries. The 
   simalube automatic lubrication system is used in 
   a wide variety of applications. The lubricant 
   dispensers are available with a wide standard 
   range of greases and oils and can be used both 
   under water and in potentially explosive areas 
   (ATEX).

Applications of simalube single-point lubricators:

-pump
-motor engine
-rolling bearings
-chains
-conveyor belts
-gears
-lifting systems
-linear/sliding guides
-threaded spindles
-ventilation system (HVAC Heating, ventilation, and 
  air-conditioning)


Simalube 250ml Empty for Self-Filling with Grease

*Please state the type of power voltage used (200V/400V).
*Lead time 3-4 weeks upon order confirmation.

The most powerful table-top heater

The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing. 

· For rolling bearings weighing up to 300 kg
· Extremely simple operation thanks to the sliding yoke
· Available for voltages of 200, 400–480 and 500–575V
· Induction coil outside of the housing, shortens the heating times and 
  reduces energy consumption
· Particularly compact design - including the yokes only 75 kg in weight
· Automatic demagnetization
· 5-stage power consumption in combination with smaller yokes, allows 
  smaller bearings to heat up safely and quickly with less energy
· For workpieces with an inner diameter of 60 to 640 mm
· Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving 
  time and energy
· 3 years manufacturer warranty
· Scope of delivery(1x simatherm IH 210, 1x User manual, 1x Temperature 
  probe, 1x Power cord, 1x Protective gloves, 1x Sliding yoke 70 x 70 for 
  bearings with bore diameter from 100 mm, 1x Yoke 40 x 40 for bearings with 
  bore diameter from 60 mm)




IH 210 (200V/400V) Induction Heater

Simatool Bearing Handling Tool BHT 500-700 (max. lifting force 700 kg)

The safe solution for handling medium, large and very large bearings

The Bearing Handling Tool is ideally suited for professionally and securely lifting large, heavy bearings.
The BHT reduces the risk of accidents and bearing damage. The BHT encloses the outer race of the bearing with a steel band. With two handles on opposite sides and two carrying belts, the bearing can be easily transported with a lifting crane. The bore remains open so the bearings can be easily placed onto a shaft. With the Bearing Handling Tool, bearings can be both horizontally and vertically fitted onto a shaft. Two anti-twist devices, which are fastened against the inner race, ensure that the inner race of the bearing does not turn out of control.

· Bearing bore remains free for mounting on shaft
· Mounting on shaft in horizontal and vertical position possible
· Avoidance of accident risk
· Can be used in combination with Simatherm induction heaters
· TÜV SÜD certified
· Scope of delivery(2 carrying belts, 2 high-quality handles, 1 pair of 
  protective gloves, 2 turning handles for safe handling, 2 steel clamping 
  strips, 2 inner race fasteners)

Bearing Handling Tool BHT 500-700 (max. lifting force 700 kg)

*Empty with self-filling with Oil

*Lead time 3-4 weeks upon order confirmation
*Refilling service excluded.

Enhance the performance and durability of your rotating machinery components with the Simalube 60ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs.


Simalube 60ML Automatic Lubricator:

- Unlimited range of uses in any location, confined 
   and hard-to-reach spaces
- Freely selectable dispensing cycle of 1 to 12 
   months
- IP68 certified and EX certified for all zones
- Environmental sustainability, easy disposal at the 
   end of the dispensing cycle
- Simalube can be refilled up to 3 times
- No more manual lubrication that resulted in 
   under-lubrication or over-lubrication with less 
   machine downtime and an increase in machine 
   performance
- Easy installation and cost-saving solution 
   suitable for a wide range of industries. The 
   simalube automatic lubrication system is used in 
   a wide variety of applications. The lubricant 
   dispensers are available with a wide standard 
   range of greases and oils and can be used both 
   under water and in potentially explosive areas 
   (ATEX).

Applications of simalube single-point lubricators:

-pump
-motor engine
-rolling bearings
-chains
-conveyor belts
-gears
-lifting systems
-linear/sliding guides
-threaded spindles
-ventilation system (HVAC Heating, ventilation, and 
  air-conditioning)

Refill Service:
https://antbuildz.com/buy/equipment/674813d8cc1d6007ca9ec0ea

*Lead time 3-4 weeks upon order confirmation
*Refilling service excluded.(For refilling service 
  please visit XXXXXXXXXX) 

Enhance the performance and durability of your rotating machinery components with the Simalube 60ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs.


Simalube 60ML Automatic Lubricator:

- Unlimited range of uses in any location, confined 
   and hard-to-reach spaces
- Freely selectable dispensing cycle of 1 to 12 
   months
- IP68 certified and EX certified for all zones
- Environmental sustainability, easy disposal at the 
   end of the dispensing cycle
- Simalube can be refilled up to 3 times
- No more manual lubrication that resulted in 
   under-lubrication or over-lubrication with less 
   machine downtime and an increase in machine 
   performance
- Easy installation and cost-saving solution 
   suitable for a wide range of industries. The 
   simalube automatic lubrication system is used in 
   a wide variety of applications. The lubricant 
   dispensers are available with a wide standard 
   range of greases and oils and can be used both 
   under water and in potentially explosive areas 
   (ATEX).

Applications of simalube single-point lubricators:

-pump
-motor engine
-rolling bearings
-chains
-conveyor belts
-gears
-lifting systems
-linear/sliding guides
-threaded spindles
-ventilation system (HVAC Heating, ventilation, and 
  air-conditioning)


Simalube 60ml Empty for Self-Filling With Oil

60ml Single Point Automatic Lubricator

*Lead time 3-4 weeks upon order confirmation.

The ideal solution for pressing in or on bearings or other ring-shaped components

Thanks to the Fitting Tool FT-P - in combination with the mechanical press - a correct assembly of components with an inner diameter of more than 50 mm is guaranteed. The FT-P is the ideal solution for assemblies with greater installation forces, as the tool can be used on presses. It thus allows assemblies that would not be possible by hitting with a hammer.

· Product designed for use with presses
· Ideal supplement to the proven simatool Fitting Tool FT 33
· High-quality aluminum rings that do not deform even with press-in forces of 5 tons
· All components available as spare parts
· Compact case with high quality tool parts and glued in instruction manual
· Also suitable for the installation of sleeves, sealing rings, pulleys, etc.
· Aluminum rings are clearly marked for quick and easy selection
· Scope of delivery (6 aluminum rings, 1 sleeve, 1 FT-P DC adapter ring (in combination with FT 33))


Fitting Tool FT-P

*Empty with self-filling with Oil

*Lead time 3-4 weeks upon order confirmation
*Refilling service excluded.

Enhance the performance and durability of your rotating machinery components with the Simalube 125ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs.


Simalube 125ML Automatic Lubricator:

- Unlimited range of uses in any location, confined 
   and hard-to-reach spaces
- Freely selectable dispensing cycle of 1 to 12 
   months
- IP68 certified and EX certified for all zones
- Environmental sustainability, easy disposal at the 
   end of the dispensing cycle
- Simalube can be refilled up to 3 times
- No more manual lubrication that resulted in 
   under-lubrication or over-lubrication with less 
   machine downtime and an increase in machine 
   performance
- Easy installation and cost-saving solution 
   suitable for a wide range of industries. The 
   simalube automatic lubrication system is used in 
   a wide variety of applications. The lubricant 
   dispensers are available with a wide standard 
   range of greases and oils and can be used both 
   under water and in potentially explosive areas 
   (ATEX).

Applications of simalube single-point lubricators:

-pump
-motor engine
-rolling bearings
-chains
-conveyor belts
-gears
-lifting systems
-linear/sliding guides
-threaded spindles
-ventilation system (HVAC Heating, ventilation, and 
  air-conditioning)

Refill Service:
https://antbuildz.com/buy/equipment/6748147ecc1d6007ca9ec443

Simalube 125ml Empty for Self-Filling with Oil

*Please state the type of power voltage used (230V/110V).
*Lead time 3-4 weeks upon order confirmation.

Electric heating plate with temperature control

The electric heating plates with thermostat-controlled heating are especially suitable for small bearings and machine parts. The temperature can be continuously adjusted between 50 °C and 200 °C on the controller.

· HPL for workpieces weighing up to 10 kg
· Designed to heat multiple workpieces simultaneously
· Flat heating surface for gentle and uniform heating of the bearing
· Also suitable for heating non-ferritic workpieces such as aluminum or 
  brass
· Available for voltages of 100–115 and 230V
· Control range from 50 to 200 °C
· 3 years manufacturer warranty
· The cover prevents contamination of the workpieces during heating. In 
  addition, the workpieces are heated quicker when the cover is closed.
· Scope of delivery(1x HPL, 1x Protective gloves, 1x User manual, 1x Power cord)


Hot Plate Large HPL (230V/110V)

*Please state your use cases in detail.
*Use cases can refer catalogue.
Deliverable:

Software
1) 1 Year License
2) Allow selection of up to 2 Use Cases Each
3) Cloud/Remote Based AI
4) Web Dashboard
5) Alert Image + Preview Video
6) Telegram Alerts
7) 1 Year storage of Alert Information
8) Configuration and Networking
9) Unlimited Account User Creation
10) Unlimited Report Generation

Hardware
1) AI-enabled Video Surveillance System (VSS) unit
with 2 IP cameras (1 Fixed Bullet and 1 Pan-TiltZoom)

Professional Services
1) Delivery, Installation, Setup
2) Maintenance, Support
3) Testing and commissioning of cameras
4) Remote viewing configuration

Training
1) 2 Hour Training For Any Number Of Users

*Please state your use cases in detail.

Deliverable:

Software
1) 1 Year License
2) Allow selection of up to 2 Use Cases Each
3) Cloud/Remote Based AI
4) Web Dashboard
5) Alert Image + Preview Video
6) Telegram Alerts
7) 1 Year storage of Alert Information
8) Configuration and Networking
9) Unlimited Account User Creation
10) Unlimited Report Generation

Hardware
1) AI-enabled Video Surveillance System (VSS) unit
with 2 IP cameras (1 Fixed Bullet and 1 Pan-TiltZoom)

Professional Services
1) Delivery, Installation, Setup
2) Maintenance, Support
3) Testing and commissioning of cameras
4) Remote viewing configuration

Training
1) 2 Hour Training For Any Number Of Users

Ai Video Surveillance Systems (2 Camera 2 Use Cases)

Ai Video Surveillance Systems (2 Camera 2 Use Cases)-AiSafety

*For Hoarding CCTV Direct Power

-High quality imaging with 4 MP resolution
-Clear imaging against strong backlight due to 120 dB WDR technology
-Efficient H.265+ compression technology
-Focus on human and vehicle classification based on deep learning
-Provide real-time security via built-in two-way audio
-Active strobe light and audio alarm to warn intruders off
-Support on-board storage up to 512 GB (SD card slot)
-Water and dust resistant (IP67)

*The above is only for the whole unit and 
  the electronics
*Things not included are the NVR, HDD 
  required for storage and installation 
  which is subjected to to actual site 
  conditions
*For estimation to handle the above 2 
  points, per camera it can be assumed 
  to have an additional $300 of cost 
  (which has been factored into the 
  calculation)
*All hardware warranty is for 1 year


*For Hoarding CCTV Direct Power

-High quality imaging with 4 MP resolution
-Clear imaging against strong backlight due to 120 dB WDR technology
-Efficient H.265+ compression technology
-Focus on human and vehicle classification based on deep learning
-Provide real-time security via built-in two-way audio
-Active strobe light and audio alarm to warn intruders off
-Support on-board storage up to 512 GB (SD card slot)
-Water and dust resistant (IP67)

Hoarding CCTV with direct power (4MP Fixed Network Camera)

Simatool Bearing Handling Tool BHT 300-500 (max. lifting force 500 kg)

The safe solution for handling medium, large and very large bearings

The Bearing Handling Tool is ideally suited for professionally and securely lifting large, heavy bearings.
The BHT reduces the risk of accidents and bearing damage. The BHT encloses the outer race of the bearing with a steel band. With two handles on opposite sides and two carrying belts, the bearing can be easily transported with a lifting crane. The bore remains open so the bearings can be easily placed onto a shaft. With the Bearing Handling Tool, bearings can be both horizontally and vertically fitted onto a shaft. Two anti-twist devices, which are fastened against the inner race, ensure that the inner race of the bearing does not turn out of control.

· Bearing bore remains free for mounting on shaft
· Mounting on shaft in horizontal and vertical position possible
· Avoidance of accident risk
· Can be used in combination with Simatherm induction heaters
· TÜV SÜD certified
· Scope of delivery(2 carrying belts, 2 high-quality handles, 1 pair of 
  protective gloves, 2 turning handles for safe handling, 2 steel clamping 
  strips, 2 inner race fasteners)

Bearing Handling Tool BHT 300-500(max. lifting force 500 kg)

*Please state your use cases in detail.
*Please provide your existing camera spec.
*Use case can refer catalogue

Deliverable:

Software
1)  1 Year License
2) Allow selection of up to 3 Use Cases Each
3) Web Dashboard
4) Alert Image + Preview Video
5) Telegram Alerts
6) 1 Year storage of Alert Information
7) Configuration and Networking
8) Unlimited Account User Creation
9) Unlimited Report Generation

Hardware
1) AI Hardware PC (Supports up to 10 existing
cameras)
Note: Customer must install 10 of their own IP
cameras as this is not part of the package

Professional Services
1) Delivery, Installation, Setup
2) One Time Hardware Relocation
3) Maintenance, Support

Training
1) 2 Hour Training For Any Number Of Users

Ai Video Surveillance Systems (Leverage 10 Existing Camera 3 use Cases)

Ai Video Surveillance Systems (Leverage 10 Existing Camera 3 use Cases)-AiSafety 

*Please state the type of power voltage used (230V/115V).
*Lead time 3-4 weeks upon order confirmation.

The popular all-round heater for flexible use.

The IH 070 is suitable for heating small and medium-sized workpieces up to 120 kg. Due to the external induction coil, the unit works extremely efficiently. The power can be adjusted in four stages if required.

· For rolling bearings weighing up to 120 kg
· For workpieces with an inner diameter of 20 to 400 mm
· Swivel arm available as an option
· 5-stage power consumption combined with smaller yokes, allows smaller 
  bearings to be heated safely and quickly with less energy
· Supplied with three yokes as standard
· Particularly compact design - including the yokes only 35 kg in weight
· 3 years manufacturer warranty
· Can heat a 65 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving 
  time and energy
· Automatic demagnetization
· Scope of delivery(1x simatherm IH 070, 1x User manual, 1x Temperature 
  probe, 1x Protective gloves, 1x Power cord, 1x Yoke 14x14 for bearings with a 
  bore diameter from 20 mm, 1x Yoke 28x28 for bearings with a bore 
  diameter from 40 mm, 1x Yoke 55x55 for bearings with a bore diameter 
  from 78 mm)

IH 070 (230V/115V) Induction Heater

*Please state the type of power voltage used (230V/110V).
*Lead time 3-4 weeks upon order confirmation.

The lightweight portable device with excellent performance.

With a weight of only 3.5 kg, the simatherm IH 025 VOLCANO is the lightest portable induction heater in the world. The patented technology enables outstanding heating performance from an extremely light structure. You can use it to heat rolling bearings with an inner diameter as small as 20 mm up to on outer diameter of 160 mm and a weight of up to 10 kg.

· Portable, compact and very light (3.5 kg) - comes in a practical carrying 
  case
· No support yoke required – simply place the workpiece on the device
· A bearing weighing 5 kg can be heated to 110°C in under four minutes
· Predictive Temperature Control (PTC) for automatic temperature 
  monitoring
· Automatic demagnetization
· For workpieces with a minimum inner diameter of 20 mm up to a maximum outer diameter of 160 mm
· For workpieces weighing up to 10 kg
· Multi-stage power reduction for heating smaller parts
· Silent in operation
· 3 years manufacturer warranty
· Scope of delivery (1x Simatherm IH 025 VOLCANO, 1x User manual, 1x 
  Temperature probe, 1x Carrying bag, 1x Protective gloves, 1x Power cord)



IH 025 VOLCANO (230V/110V)

IH 025 VOLCANO (230V/110V) Induction Heater 

*Lead time 3-4 weeks upon order confirmation.

The most powerful table-top heater

The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing. As a special version, the IH 210 is equipped with fan cooling (IH 210F) for continuous operation.

· For rolling bearings weighing up to 300 kg
· Extremely simple operation thanks to the sliding yoke
· Available for voltages of 200, 400–480 and 500–575V
· Induction coil outside of the housing, shortens the heating times and 
  reduces energy consumption
· Particularly compact design - including the yokes only 75 kg in weight
· Automatic demagnetization
· 5-stage power consumption in combination with smaller yokes, allows 
  smaller bearings to heat up safely and quickly with less energy
· For workpieces with an inner diameter of 60 to 640 mm
· Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving 
  time and energy
· 3 years manufacturer warranty
· Scope of delivery(1x simatherm IH 210F, 1x User manual, 1x Temperature 
  probe, 1x Power cord, 1x Protective gloves, 1x Sliding yoke 70 x 70 for 
  bearings with bore diameter from 100 mm, 1x Yoke 40 x 40 for bearings with 
  bore diameter from 60 mm)

Maintenance & Repair Services For Sale

Buy new and used Maintenance & Repair Services